A Ironworks company - serving Winchester, NV
Gate Parts & Welding in Henderson, NV | Ironworks Gate Co. Winchester

Gate Parts & Welding in Henderson - Welded and Fitted, Priced Up Front

Hinges, wheels, tracks and steelwork made to fit your gate rather than forced from a generic kit. Measured, fabricated and fitted, with the price agreed before we cut anything.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Fast, Reliable Gate Parts & Welding Across Henderson

If you own a custom ornamental or steel driveway gate in Henderson, you already know the metal takes a beating here. We work on Henderson gates every week: hinges that have loosened over years of daily heat cycling, cracked welds at latch points, posts that have shifted in the clay, and old operators that finally quit. We know the difference between a Green Valley iron gate and a newer Anthem installation, and we quote the price before any work starts. Call (866) 984-8340 and a live person will pick up, day or night.

Professional welding services for gate repairs and metal fabrication in Henderson, NV

Call (866) 984-8340

Why Ironworks Gate Co. Winchester Is Henderson’s Preferred Gate Parts & Welding Company

We’ve built our reputation on the kind of gates Henderson homeowners actually own: hand-fabricated ornamental iron and steel, hung on masonry pillars, often paired with a matched intercom, keypad and camera at the street. Our technicians have up to 13 years of experience and are trained on the automation brands that show up most often on Henderson driveways, including LiftMaster, FAAC and Elite.

Response to Henderson is reliable because we treat the whole east valley as home ground. A live person answers every call, 24 hours a day, seven days a week, so a gate that won’t close on a Sunday evening doesn’t leave you waiting until Monday. Every job is protected by our written 90-Day Done Right Promise. If something isn’t right, we come back and make it right. No paperwork and no arguing.

Henderson customers stay with us because we explain what failed and why, then fix the actual cause rather than selling a new operator when the real problem is a loose post. See our full Gate Parts & Welding services if you want the complete scope.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Gate Parts & Welding Services in Henderson

These are the parts and welding jobs we handle most across Henderson’s master-planned subdivisions, from Green Valley to Anthem to the older tracts off Boulder Highway.

Hinge Replacement in Henderson

When a heavy ornamental gate drags, the hinge is usually where the wear shows first. We replace worn hinges with properly sized hardware rated for the gate’s weight, then re-hang and realign so the gate swings without catching. On Henderson gates hung on masonry pillars, we also check that the hinge plate hasn’t pulled loose from the steel frame.

Hinge Replacement in Henderson

Post Replacement in Henderson

A leaning or shifted gate post is often the root cause of sagging, misalignment and premature operator wear. We assess whether the post can be reinforced or needs full replacement, account for the expansive clay soils common in Henderson yards, and set the new post so the gate hangs true. This is the repair that stops the cycle of sagging.

Post Replacement in Henderson

Rail Repair in Henderson

Bent, cracked or separating rails on a steel gate can look cosmetic until the structure weakens. We straighten and repair rails on driveway and courtyard gates throughout Henderson, then check alignment at the latch and strike so the gate seats correctly. A rail repair done right also protects the operator from fighting a twisted gate.

Rail Repair in Henderson

Custom Welding in Henderson

We weld ornamental iron and steel gates on site when possible, matching the original profile and finish so the repair disappears into the gate. Henderson’s thermal expansion and contraction cracks welds at hinge and latch points over time, so we reinforce those stress areas as part of the repair. Custom fabrication and gate modifications are welcome, including intercom and camera mounting brackets.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (866) 984-8340

Trusted Brands We Service in Henderson

We’re certified to service nine major automation brands, including LiftMaster, FAAC, Elite and Mighty Mule, which covers most of what’s already installed on Henderson gates. We don’t carry parts in a truck or stock locally, so we diagnose the failure, identify the right component, and source it. That keeps turnaround quick without a guessing game or a wrong-fit part bolted on. If your operator is a brand we don’t recognize from the driveway, we’ll tell you honestly on the call.

Custom metal gate hardware and welding repair tools on a workbench in Henderson, NV
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Common Gate Parts & Welding Problems We See in Henderson Homes

Henderson is a particular place to own a metal gate. Summer highs top 110°F and winter nights drop near freezing, a 40 to 50°F daily swing that works on metal and masonry every single day.

  • Cracked welds at hinge and latch points. Daily thermal expansion and contraction fatigue welds over years, and the hinge and latch carry the most stress. A crack you can see is usually a crack you can fix before it becomes a structural failure.
  • Failing 1990s operators. In older Green Valley tracts, original operators are finally giving out at the same time. Sun-baked control boards and photo-eye lenses clouded by fine desert dust cause the same intermittent operation as worn mechanical parts.
  • Masonry pillar shift. Expansive clay soils move the pillars that many Henderson gates are mounted to, which misaligns the gate and accelerates wear on hinges and latches. The pillar isn’t always the whole story, but it’s often part of it.
  • Heat-cycle fatigue at the hinge post. Even when the pillar is stable, the hinge post loosens from daily temperature swings and takes the gate out of square. This is the dual failure mode most generic repair advice misses.

A typical call in Henderson involves a 20-year-old custom ornamental iron swing gate in a Green Valley subdivision that has started to drag and misfire. The homeowner finds the operator unresponsive, but a qualified technician will first check the hinge post for movement caused by heat-cycle fatigue and soil shift, then inspect the operator’s control board and photo-eye lenses for dust and UV damage. The fix usually combines hinge post reinforcement or replacement with cleaning or replacing clouded safety photocells, followed by sag correction and recalibration of the operator.

Pricing for Gate Parts & Welding in Henderson, NV

We quote and agree the price before any work starts, so there’s no surprise on the bill. In Henderson’s market, a typical hinge replacement runs $150 to $320 per hinge, depending on hardware and gate weight. Hinge post reinforcement or replacement usually runs $300 to $650. Rail repair and straightening runs $180 to $450. Custom welding and fabrication is quoted per job, commonly $200 to $600 for a repair and higher for new ornamental work. Latch and lock service typically runs $120 to $280. A failed operator component, like a control board or photo-eye set, generally runs $220 to $550 installed. If the post and the pillar both need attention, we’ll spell out both costs before starting. Estimates are free, and we honor our standing offers: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a 5% senior and veteran discount.

We Also Serve Cities Near Henderson

We work the surrounding communities as well, including Boulder City, Whitney, Paradise and Enterprise. If you’re just outside Henderson, the same pricing and the same 90-Day Done Right Promise apply. You can read more about Gate Parts & Welding in Henderson and the neighborhoods we cover on our city page.

Serving Henderson, NV – Our Local Coverage Area

We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Gate Parts & Welding in Henderson

Why Henderson Chooses Ironworks Gate Co. Winchester

We set the standard for gate parts & welding in Henderson.

30-60 Min Response

Fast dispatch across Henderson. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Henderson

Getting your gate parts & welding handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate parts & welding needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Henderson - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate parts & welding pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within 60 minutes.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Henderson Customers Say

Trusted by homeowners across Henderson and surrounding areas.

★★★★★

"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."

Devon Ingram
★★★★★

"Our slide gate had been dragging for months and getting worse. The chain was stretched and a guide roller had seized. Both replaced, and he reset the limits so it stops properly at each end now."

Veronica Ramirez
★★★★★

"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."

Jamal Dawson

Ready for Gate Parts & Welding in Henderson?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Henderson.

(866) 984-8340

Request a Free Estimate in Henderson

Tell us about your gate parts & welding needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - 24/7 Dispatch