Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Enterprise
If you’re in Enterprise and your gate has started dragging, sagging, or skipping on its track, we’re the crew to call. Ironworks Gate Co. provides gate parts and welding for the acreage entrances and master-planned driveways that make up this part of the valley, and we understand what Enterprise properties actually demand: wide gates, long runs, and solar operators that have to work in heat that tops 105°F most summers. We keep the pricing upfront and settled before any work starts. Call (866) 984-8340 and we’ll get you a free estimate.

Why Ironworks Gate Co. Winchester Is Enterprise’s Preferred Gate Parts & Welding Company
Enterprise homeowners and acreage owners call us because we tell them what the gate needs, not what’s easiest to sell. When a wide swing gate starts dragging on the southern edge of town, the easy answer is a new operator. The right answer is usually the hinge post footing, and we check that first.
Our technicians are background-checked and uniformed, and they have up to 13 years of experience on everything from decorative driveway gates to heavy steel roll-up gates at the logistics facilities off the I-15 corridor. We’re trained and equipped on nine gate-automation brands, including Elite, Mighty Mule, LiftMaster, and FAAC, so whatever’s bolted to your gate, we can diagnose and fix it on the first visit. That matters in Enterprise, where a replaced motor that doesn’t solve the sag is a bill nobody wants to pay twice.
Every job is backed by our written 90-Day Done Right Promise. If something isn’t right, we come back and make it right. No paperwork, no arguing. That’s the standard, and it applies to a hinge swap on a 20-year-old tract-home gate the same way it applies to a full post replacement out on an acreage property.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Enterprise
Here’s what we handle on Enterprise gates. For the full scope of what our Gate Parts & Welding team covers, that page goes deeper.
Hinge Replacement
In the caliche-heavy soil common on Enterprise’s southern and eastern acreage, hinge posts settle and gates start to sag. We pull the old hinge, inspect the post, and either re-hang on the same post or replace it. A dragging gate that gets a new hinge on a settled post will sag again in a season, so we check the footing before we bolt anything up.

Post Replacement
Post replacement in Enterprise usually means digging through caliche, which is hard work and takes longer than most people expect. When the hinge post has heaved or rotted out, we set a new post at the right depth so the gate swings true, and we build the operator strain out of the equation. This is the fix that saves you a motor replacement.

Rail Repair
Rust and metal fatigue on builder-grade gates show up first at the rails. We weld up cracks, replace bent sections, and reinforce the frame so the gate stays square. On the stucco-and-block homes off Silverado Ranch Blvd, rail damage from a settling post is common, and it gets repaired alongside the post so the gate closes clean.

Custom Welding
HOA architectural guidelines in Enterprise’s bedroom communities often dictate exact gate styles and colors. We carry color samples and know how to match the original spec so a repair doesn’t trigger a violation notice. Custom welding is also how we handle the heavy steel work on warehouse roll-up gates along the industrial side of Enterprise, where standard residential parts won’t fit.

Trusted Brands We Service in Enterprise
We’re trained and equipped on nine gate-automation brands, including LiftMaster, FAAC, Elite, and Mighty Mule, so we can service what’s actually on your driveway. We don’t claim to stock parts in Enterprise. What we do is diagnose correctly, pull the right component for the brand and year, and get back to you fast, usually in a single visit. If you’re not sure what brand your operator is, we’ll identify it and tell you honestly whether the fix is a part swap or a wider repair.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Parts & Welding Problems We See in Enterprise Homes
- Solar opener batteries failing early. Summer heat over 105°F degrades batteries fast, and an undersized panel on a wide farm gate can’t keep up with the draw. When the operator strains to compensate for a dragging hinge, the battery drains even faster, and people assume the motor is dead.
- Hinge posts heaving or rotting in caliche. The soil on Enterprise’s acreage edges is hard and shifts with the seasons. Post failure often gets misdiagnosed as a motor problem, and the wrong part gets replaced.
- Dust storms jamming slide tracks. Monsoon-driven grit packs into the track, wears the rollers, and can make the rack and pinion skip teeth. Roller and track maintenance is one of the cheapest things you can do to keep a sliding gate running.
- Gates hitting end-of-life. Enterprise’s stucco tract homes went up in the 1990s and 2000s, and many original builder-grade metal driveway gates are now at the point where the hinges and posts both need attention at once.
Pricing for Gate Parts & Welding in Enterprise, NV
Here’s what Enterprise gate work typically runs. Hinge replacement runs $180 – $450 per hinge depending on the gate weight and post condition. Post replacement usually lands between $350 – $900 once you account for digging through caliche. Rail repair and smaller welding jobs run $150 – $400, while custom welding on a heavy steel gate runs $300 – $800 and up. Gate rollers run $120 – $280 for a standard set. Every price is quoted and agreed before we start, so you’ll never see an invoice bigger than the number you signed off on. Estimates are free, and we’ll give you a second opinion on any written estimate you already have. Standing offers: $50 off any repair over $250, and an $89 seasonal tune-up. Call (866) 984-8340 for exact pricing on your gate.
We Also Serve Cities Near Enterprise
We work the whole south valley, so if you’re just outside Enterprise in Enterprise neighborhoods or the surrounding areas, we can help. We also serve Spring Valley, Paradise, Winchester, and Henderson. The same rules apply out there: check the footing before the motor, quote the price before the bolt.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Enterprise
Your solar opener is usually underpowered for the job, not broken. On rural Enterprise properties with long driveways, the panel placement and battery voltage have to match the gate’s span and weight, and summer heat over 105°F shortens battery life. A qualified tech will check the panel output, the charge controller, and the rack and pinion for binding before recommending a higher-torque operator or a bigger panel array. Call (866) 984-8340 for a free estimate.
Yes. HOA architectural guidelines off Silverado Ranch Blvd and similar bedroom communities often dictate exact gate styles and colors, so we carry color samples and match the original spec. Custom welding on those gates keeps the repair within CC&Rs so you don’t get a violation notice. Call for a free estimate on the match and the weld.
If the post moves when you push on it, it needs replacement; if the hinge bolts have backed out but the post is solid, adjustment may be enough. In Enterprise’s caliche soil, post heaving is common, and a settling post is a bigger job than a hinge bolt. The only reliable test is on site, and we’ll tell you which one you’re looking at. Call (866) 984-8340.
Automatic gates in Nevada need presence-sensing protection so the gate reverses on contact with a person or object. That typically means photo-eye loops, safety edges, or both, and the standard is set by the gate operator and local code. We don’t skip safety devices and we don’t re-use tired ones. A free safety check is part of any estimate.
Dust storms jam the track with grit, and grit grinds the rollers down fast on sliding gates. Worn rollers cause the rack and pinion to skip teeth, which can strain the operator motor. Roller replacement runs $120 – $280 for a standard set, and a seasonal tune-up clears the grit so they last longer. Call for a quote.
If your gate has started dragging, sagging, or skipping, don’t wait for the operator motor to fail too. Call (866) 984-8340 for a free estimate on gate parts and welding in Enterprise. A live person answers every call, 24 hours a day, 7 days a week, and we’ll tell you honestly what the gate needs. Done right, and backed in writing.
Written by the team at Ironworks Gate Co.