Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Whitney
Gate parts and welding in Whitney are a repair-first trade, because most of the gates here were hung years ago and need to keep working, not get replaced. If your driveway gate drags, your latch misses the strike, or a weld has cracked, we can help. Our technicians have up to 13 years of experience with hinge replacement, post replacement, rail repair, and custom welding, and they know the 89122 corridor well enough to diagnose the problem before quoting a fix. Most repairs are completed in a single visit, with the price settled before anyone touches a bolt. Call (866) 984-8340 and a live person will answer, day or night.

Why Ironworks Gate Co. Winchester Is Whitney’s Preferred Gate Parts & Welding Company
Whitney homeowners are not shopping for the cheapest bid. They want the gate fixed once and guaranteed in writing, and that is what we do. Local customers call us back because we tell them plainly when a weld-and-rehang will hold and when a gate has reached the end of its working life. Our Gate Parts & Welding team brings welding craft and operator know-how to every visit, and the work is covered by our written 90-Day Done Right Promise: if it is not right, we come back and make it right.
Response time to Whitney is generally same-day for repair calls. The 89122 corridor is compact enough that a technician traveling from the surrounding east Las Vegas neighborhoods reaches most Whitney addresses quickly, and emergency gate problems get priority overnight. We also offer a $50 discount on any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Whitney
Whitney’s gates are mostly older than they are broken, so the hard part is telling which repair a gate actually needs. These are the four jobs we handle most often across the 89122 corridor.
Hinge Replacement in Whitney
When a gate sags on its hinge, the first question is whether the hinge itself is worn or whether it is fighting the post. On Whitney’s older steel and chain-link gates, UV and 100°F-plus summers seize hinge pins and dry out the welds that hold the brackets. A typical hinge replacement here runs $120 to $260 per gate, and if the post has leaned, it has to be corrected first or the new hinge will fail the same way.

Post Replacement in Whitney
A gate post that is out of plumb will drag any panel hung on it, no matter how good the hardware. On Whitney’s wide-lot parcels, posts often straddle a settling driveway approach or a shared block-wall entry, and cracking in the slab lets them lean. Typical post replacement in Whitney runs $350 to $950 depending on depth, access, and whether the old footing has to be demoed. We re-set the post in new concrete and confirm it is plumb before the gate goes back on.

Rail Repair in Whitney
Rail repairs cover bent, cracked, or rusted horizontal members and the joints that hold an older panel together. Whitney’s manufactured-home and tract parcels often have gate rails that have been patched over the years, and a proper repair means removing bad weld and laying a clean bead rather than bolting angle iron over the break. Most rail repairs in Whitney run $150 to $400.

Custom Welding in Whitney
Custom welding covers everything from a broken latch tab to re-welding a gate frame that has pulled away at an original joint. In the older 1970s-80s Whitney subdivisions, gates were welded with finishes that held up well in their day but have now failed, and re-welding with a proper finish is often cheaper than a new panel. Small tab and joint welds start around $100; larger structural welding on a gate frame can run $200 to $600.
Trusted Brands We Service in Whitney
We are trained and equipped to work on the gate operators most Whitney homeowners already have, including LiftMaster, DoorKing, and Mighty Mule. The correct fix depends on knowing the unit, not on swapping parts until something works, and that is why a proper diagnosis comes before a quote. We do not carry parts on a truck or hold local stock, so if a module or bracket has to be sourced, we tell you what it costs and when it will be in before anyone starts work. For older operators in Whitney, the more common issue is a discontinued control board rather than a failed motor, and we will say plainly whether a replacement board can still be had or whether a retrofit is the better answer.

Common Gate Parts & Welding Problems We See in Whitney Homes
- Hinge posts leaning on settling slabs. On Whitney’s wide-lot tract and manufactured-home parcels, the driveway approach or shared block-wall entry shifts and the post goes out of plumb. The gate drags and misses the latch even after new hardware is installed, because the problem is in the footing, not the hinge.
- Obsolete control boards on legacy operators. Many Whitney gates were automated with operators installed before modern boards existed. The rest of the unit can be sound while the board can no longer be sourced or matched, which is when a retrofit or a new board becomes the real answer.
- UV and desert heat seizing hinges and rollers. Whitney’s Mojave summers push 100°F-plus and the UV is intense, so hinge pins and rollers stiffen and finishes fail on older steel gates. Re-greasing and re-finishing at the start of each summer is cheaper than replacing seized hardware mid-season.
- Winter freeze and monsoon runoff stressing latches. Whitney gets the occasional monsoon and winter freeze, and both put stress on latches and exposed low-voltage wiring. Latch adjustment and a check of the wiring run before and after the season prevents most mid-year failures on older gates.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Parts & Welding in Whitney, NV
Pricing in Whitney is quoted upfront and agreed before any work starts, and the ranges below reflect what the 89122 corridor typically costs for each job.
- Hinge replacement: $120 to $260 per gate
- Post replacement with new footing: $350 to $950
- Rail repair (bent, cracked, or re-welded rail): $150 to $400
- Custom welding (tab, joint, or frame repair): $100 small weld up to $600 for larger structural work
- Gate rollers and track: $100 to $250
- Latch and lock adjustment or replacement: $90 to $220
What moves a Whitney quote toward the top of a range is access, whether the old footing has to be cut out, and whether the operator has to be re-hung after the post is corrected. Estimates are free, and the number we give is the number on the bill.
We Also Serve Cities Near Whitney
The technicians who work in Whitney also cover Sunrise Manor, Winchester, Paradise, and Las Vegas. If you are just outside the 89122 boundary, call with your address and we will confirm coverage and a time. We are glad to be serving Whitney and its neighbors with the same standard on every job.
Serving Whitney, NV – Our Local Coverage Area
We serve Whitney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Whitney
On most older Whitney gates, it is the post, not the hinge. In the 89122 corridor, the driveway approach or shared block-wall entry settles and the hinge post leans out of plumb, so a swing gate that looks broken at the hinge is really a cracked-slab problem, and new hinges will fail the same way until the post footing is corrected. A technician checks plumb first, then re-hangs or re-welds the panel and re-checks the latch. Call (866) 984-8340 for an exact quote, and estimates are free.
Often, yes. When the motor and mechanicals of an older operator in a Whitney subdivision are still sound, a retrofit board or a compatible replacement is usually the cheaper answer than a full operator swap. When the board cannot be sourced or matched and the rest of the unit is worn, replacement is usually the cheaper path. A proper diagnosis settles which case applies. Call (866) 984-8340 and we will look at what you have before quoting anything.
The safety additions that matter most are photocell or obstruction detection on any automatic operator, proper hinge and post integrity so the gate does not fall, and a latch that will not open under load. Older Whitney gates and operators were not built to current standards, so a technician will check the swing path, the operator’s safety edges, and the low-voltage wiring before putting the gate back in service. If a board or operator cannot support safety sensors, a retrofit is the honest answer.
Because the failure is often under the gate, not in it. Whitney’s wide-lot parcels sit on older slabs, and both monsoon runoff and years of sun cause cracking and shifting at the driveway approach or shared wall entry where the hinge post is set. The panel looks blamed, but the post is leaning and the gate drags. Re-setting the post footing in new concrete cures what hardware swapping cannot. Call (866) 984-8340 for a free assessment.
Usually, but only if the gate swings freely and the post is solid. A solar opener on a gate that already drags will just wear the operator faster, and Whitney’s older steel panels can be heavy enough that the operator needs to be sized to the gate, not chosen for convenience. Correcting the hinge and post first, then matching the operator, is the right order. Estimates on operator retrofits in Whitney are free; call to get one.
A Gate That Can’t Be Fixed Cheaper Than Replaced – We’ll Tell You
Whitney’s older gates are worth retrofitting when the slab can be corrected, the post can be re-set, and the operator can be matched to a board that still exists. When the slab has cracked through, the panel has warped or rusted through, and no compatible board can be sourced, replacement is the cheaper answer, and we will say so instead of billing a repair that will not hold. That is the way we work: the price is quoted and agreed before any work starts, the job is done right, and it is backed in writing by our 90-Day Done Right Promise. Call Ironworks Gate Co. Winchester at (866) 984-8340 for a free estimate. We will be there when we say.
Written by the team at Ironworks Gate Co.