Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Boulder City
If your gate has started to drag, stick, or stop halfway, the fix usually comes down to the metal and the parts holding it, not the whole gate. We’re Ironworks Gate Co., and we handle gate parts and welding across Boulder City, from the historic district near the old dam-worker blocks out to the acreage entrances along the edges of town. We know what Boulder City weather does to iron and steel, and we quote the price before we start. Call (866) 984-8340 and a live person answers, day or night.

Why Ironworks Gate Co. Winchester Is Boulder City’s Preferred Gate Parts & Welding Company
Boulder City homeowners tend to call rather than click, and they remember the last contractor who left a job half done. We work to earn the second call, not just the first. Our technicians have up to 13 years of experience, they’re background-checked and uniformed, and the price is settled before a bolt is turned. If something isn’t right, we come back and make it right under our 90-Day Done Right Promise, in writing.
That matters here because Boulder City’s gates aren’t all alike. A cottage in the historic core may wear the same wrought-iron gate hung in the 1930s, while a spread out toward the edge of town runs a wide swing gate on a long driveway powered by a solar opener. We bring the right parts and the right approach to both, and we’re trained on the leading automation brands so the diagnosis is correct the first time. We serve Boulder City and the surrounding communities from the same local crews, which keeps our response tight. A live person takes your call 24 hours a day, 7 days a week.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Boulder City
Most of the calls we get in Boulder City come down to a few parts failing at once: hinges that have worn, a post that has shifted, a rail that split or cracked, and welds that let go after years of sun. Here’s how we handle each, and how a real Gate Parts & Welding job gets done right.
Hinge Replacement in Boulder City
A gate that sags or scrapes is often working on worn hinges long past their life. We replace tired hinges with the right weight-rated hardware and check that the frame still hangs true. On original iron in the historic district, we take care to match the profile so the repair blends in.

Post Replacement in Boulder City
When a hinge post pulls loose from its footing, no amount of tightening will hold a wide gate. We re-set or replace the post, anchor it back to solid ground, and re-hang the gate so it swings freely again. That one repair solves most of the sagging that shows up on long rural driveways around Boulder City.

Rail Repair in Boulder City
Mojave sun and dry air bake and warp frames, and a rail that has cracked will only get worse. We repair or replace damaged rails, straighten bent sections, and re-weld joints that have separated. The gate comes back square and closes cleanly on the post.

Custom Welding in Boulder City
Some gates need fabrication, not just a part swap. We weld custom brackets, gate frames, and matching replacement sections, and on Boulder City’s historic homes we rehab original wrought-iron and early steel so the gate stays compliant with preservation guidelines. Repairing in place is often the only option that respects those rules.
Trusted Brands We Service in Boulder City
We work on gate hardware and operators from LiftMaster, DoorKing, Elite, and Mighty Mule, among others, so whatever sits on your driveway we can diagnose and put back in service. What sets the work apart is that we don’t need to reach for the wrong part. We know which hinges, latches, and controllers fit which gate, and we make the correct fix on the first visit. For Boulder City homeowners on a wide swing gate or a sliding gate, that means a shorter wait and a gate that actually works when we leave. If you’re not sure what’s on your gate, tell us on the call.

Common Gate Parts & Welding Problems We See in Boulder City Homes
- Solar opener batteries and controllers failing. Sustained heat and monsoon dust wear down solar gate openers, leaving a long rural driveway stuck open or closed. We test the battery and controller and get the operator working again.
- Sagging wide farm and driveway gates. A gate that hangs low usually points to a hinge post pulled loose from its footing, not a bad panel. We re-anchor the post and re-level the gate so it swings true.
- Cracked or seized original ironwork. On historic-district homes, age and hard freezes crack and seize hinges on original wrought-iron gates. Repair has to respect preservation controls, so we rehab the ironwork rather than swap panels.
- Worn latches and locks. Heat and dust work latches and locks loose, so a gate stops latching or the lock won’t turn. We replace the hardware and set it so it catches and locks cleanly.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Parts & Welding in Boulder City, NV
Here’s a straight look at what this work runs in Boulder City. A hinge or latch replacement typically runs $120 – $280. A hinge-post re-set or replacement usually lands between $350 – $900, depending on footing and access. Rail repair or re-welding runs about $150 – $450. Custom welding and historic-iron rehab on original sections can run $300 – $1,200 or more, since matching a vintage profile takes time. Solar opener parts and controllers add to the total, and emergency calls on a stuck gate carry a modest premium. Every price is quoted and agreed before we start, so there are no surprises on the bill. Estimates are free, and standing offers like $50 Off Any Repair Over $250 and a 5% Senior and Veteran discount apply. Call (866) 984-8340.
We Also Serve Cities Near Boulder City
The same local crews that work in Boulder City also serve Henderson, Whitney, Paradise, and Enterprise. If you’re just outside town, tell us where you are and we’ll get you on the schedule. See more about Gate Parts & Welding in Boulder City.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Boulder City
Tightening the hinges won’t fix a hinge post that has shifted in its footing, and that’s usually the real cause on a wide gate. The post needs to be re-leveled and re-anchored to solid ground, and the gate re-hung, so the weight is carried correctly. Call (866) 984-8340 for an exact quote.
Yes, a solar opener built for the load can handle a long rural driveway gate, but it has to match the gate’s weight and span and survive the summer heat and dust. A mismatched operator will trip out or stop mid-travel. If yours already does, we can check the battery, controller, and rack and pinion and get it working. Call (866) 984-8340.
In most cases, yes. Original wrought-iron and early steel gates on dam-era homes can be welded, re-hinged, and repaired in place rather than replaced, and repair is often what keeps the gate compliant with preservation guidelines. We match the original profile so the fix blends in. Call (866) 984-8340 for a free estimate.
Every automatic gate should have working entrapment protection, meaning a safety photocell that stops or reverses the gate if something crosses its path, and it should be tested regularly. Never bypass or disable a safety edge or photocell to keep a gate moving. A trained technician should verify the safety edges and operator settings are working. Call (866) 984-8340 if yours needs a check.
Boulder City’s deep Mojave heat, intense sun, and occasional monsoon dust wear down latches and hinges fast, so they dry out, seize, and lose their match. The fix is the right hardware and regular service before it fails. Call (866) 984-8340 for an exact quote, and estimates are free.
Let’s Get Your Gate Working Again
If your gate is dragging, stopping mid-travel, or its original iron has cracked, we can help. We handle gate parts and welding for Boulder City homes and acreage entrances, we quote the price before we start, and we back the work with our 90-Day Done Right Promise. Call (866) 984-8340 for a free estimate.
Written by the team at Ironworks Gate Co.