Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Installation for Winchester Homeowners
A gate that will not close leaves a driveway open all night. A gate hung crooked catches on the concrete every time it moves. Getting the gate itself right – the posts, the hinges, the swing, the alignment – is the part most outfits rush, and it is the part that decides whether the thing works ten years from now. Our technicians have up to 13 years of experience hanging gates that stay square, and we install driveway and estate gates for homeowners across Winchester and the surrounding valley. We quote the price before a single bolt is turned, and every job is backed by our written 90-Day Done Right Promise. Call (866) 984-8340 and a live person answers, day or night.
What Our Gate Installation Service Includes
We install gates and gates only. That focus is why the hardware, the posts, and the automation all get planned together instead of bolted on in pieces. Here is what each type covers.
Driveway Gate
A driveway gate is the main entry to the property, and it takes the most daily wear of anything on the lot. You need one when the old gate sags beyond adjustment, when the posts have rotted at the ground line, or when the driveway is being redone and the gate geometry has to change with it. We set new posts to the right depth for Winchester’s caliche-heavy soil, check the plumb on both sides, and hang the gate so it clears the ground through its full travel.

Pedestrian Gate
A pedestrian gate is the walk-through entry, usually matched in style to the driveway gate but sized for foot traffic. It needs attention when the walkway gate sticks, when the latch no longer lines up with the strike, or when the old gate has rusted at the hinge side from years of irrigation overspray. We hang pedestrian gates with adjustable hinges so the latch can be tuned years later without cutting new holes in the frame.

Sliding Gate
A sliding gate rolls along a track instead of swinging open, which makes it the right choice when the driveway is short or slopes toward the street. Homeowners ask for one when a swing gate would foul a parked car or hang out over the sidewalk. We set the track level and anchored, install the guide rollers, and confirm the gate runs the full length without binding before we call the job done.

Swing Gate
A swing gate is the classic setup, hinged on one side and opening through an arc into the property. You need a swing gate when the driveway has room for that arc and the posts can carry the weight without flexing. We check the post footings first, because a swing gate hung on an undersized post will sag no matter how good the hinges are, and we fit stops and latches that hold position in wind.
Double Gate
A double gate is two leaves meeting in the middle, the standard for wide driveways and for properties that need to open clear for trailers or RVs. It gets called for when a single leaf would be too heavy to swing or too wide to hang straight. We install double gates with a center drop rod and an alignment that lets both leaves meet cleanly, then verify the two-leaf geometry with a level and a string line so the gap stays even.
Security Gate
A security gate is built for controlled entry, with heavier framing and hardware that resists forcing at the latch and hinges. It is the right call for a gated side yard, a rear access point, or anywhere the gate is doing real work keeping people out rather than just marking a boundary. We install security gates with reinforced hinge plates and tamper-resistant latches, and we coordinate the keypad or access hardware so the whole entry works as one system.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Brands We Service for Gate Installation
Most new gates end up automated, and the opener you choose matters as much as the gate. We are trained and equipped on nine gate-automation brands, including LiftMaster, FAAC, Elite, and Mighty Mule. With LiftMaster we know how the operator handles a heavy residential leaf and where the limits drift after a few seasons. With FAAC we know the swing and slide operators that suit a longer driveway and how to set the slow-down zones so the gate eases into the stop instead of slamming.
With Elite and Mighty Mule we know the residential operators that fit a modest budget and the points where a lighter unit will struggle on a heavy gate. That matters in Winchester, where a metal gate sitting in direct sun all afternoon gets hot enough to change how the operator feels. We match the motor to the actual weight and duty cycle rather than reaching for whatever is on sale. Whether you have an Elite operator, a Mighty Mule, a LiftMaster, or any other make, we can help.
Signs You Need Gate Installation Right Now
- Posts leaning or rotting at the ground. A gate post that has moved a half inch will push the whole gate out of alignment, and no amount of hinge adjustment fixes a bad post. If the post wobbles when you push on it, the footing needs replacing, not the hinge.
- The gate drags on the concrete or dirt. A gate that scrapes through its swing has lost its geometry, usually from a sagging hinge or settling ground. Dragging wears the metal and strains the opener, so it is worth addressing before the operator burns out too.
- Hinges pulling out of the frame. Rusted or undersized hinges that are tearing loose from the gate frame mean the hardware was never sized for the weight. Left alone, the gate will eventually drop off the post.
- The gate no longer latches or lines up with the strike. When the latch stops catching, the gap has shifted, and a gate that will not stay shut is doing none of its job. This is often the first sign that the whole setup needs to be re-hung.
- You are adding automation to a gate that was never built for it. An old manual gate hung for swinging by hand may not be stiff enough for an opener. We check the frame and posts before recommending a motor, so the automation is not fighting a weak gate.
Our Gate Installation Process – Step by Step
- 1
Free on-site measure and written price. We come out, look at the driveway, the grade, and the soil, and measure the opening. You get a written price before anything is ordered, and we agree on it before work starts.
- 2
Plan the posts and the hardware. We size the posts for the gate weight and depth them for the ground, and we choose hinges, latches, and stops sized to the leaf. If automation is going in, we confirm the operator rating against the real weight.
- 3
Order and schedule. Gate installation is measured and built, so it gets scheduled rather than dispatched. We give you a date and stick to it, and we call ahead before we arrive.
- 4
Set posts, hang the gate, and align. We set the posts plumb, hang the gate, and check the swing or slide through its full travel with a level and a string line. We tune the latch, stops, and drop rod so everything meets cleanly.
- 5
Test and walk it through with you. We run the gate, test the operator and any access hardware, and show you how it should sound and move. Then we hand over the written 90-Day Done Right Promise. If it is not right, we come back and make it right.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Winchester?
A typical pedestrian gate installation in Winchester runs $450 to $1,200, while a standard single swing driveway gate runs $2,000 to $4,500 installed, and a double driveway gate runs $3,800 to $7,500 depending on width, material, and posts. Adding automation pushes those numbers up, with a quality opener and its install adding roughly $900 to $2,400 on top of the gate itself.
What moves the price: the gate material (steel and ornamental iron cost more than lighter aluminum), the width and weight of the leaf, how deep the posts have to go in Winchester’s hard soil, whether old posts and concrete need to come out first, and whether you are adding a keypad or access hardware. To avoid overpaying, get the price in writing before work starts, ask what is included for posts and hardware, and be wary of a quote that leaves the posts out. Our free estimate covers the measure, the post and hardware plan, and a written price, and we settle it with you before a single bolt is turned. Call (866) 984-8340 for an exact quote.
Gate Installation Near Winchester – Our Service Area
We install gates throughout Winchester and the neighborhoods around it, and we also work in Paradise, Sunrise Manor, Whitney, Spring Valley, and Las Vegas. Most jobs in the Winchester area are scheduled within a few days of the measure, and we call ahead so you know when to expect us. If you are nearby, see our gate installation in Winchester page for the full scope, or head back to our home page to see everything we do.
Serving Winchester, NV – Our Local Coverage Area
We serve Winchester and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Gate Installation in Winchester
Gate installation is setting new posts, hanging a new gate leaf, and aligning the hardware so the gate opens and closes cleanly, with automation added if you want it. It covers driveway, pedestrian, sliding, swing, double, and security gates, and it can replace a failing gate or add a gate where there was none. We measure first, plan the posts and hardware for the actual weight, and give you a written price before ordering. Call (866) 984-8340 to set up a free measure.
Most single residential gate installations are completed in one visit, and a double driveway gate with automation often takes a longer day or a second scheduled visit once the gate is built. Because a gate is measured and built to your opening, we schedule the work rather than promising same-day install. You get a date and we stick to it. Call (866) 984-8340 and we will give you a realistic timeline for your gate.
A pedestrian gate runs about $450 to $1,200, a single swing driveway gate runs $2,000 to $4,500, and a double driveway gate runs $3,800 to $7,500 installed, before automation. The final price depends on material, width, post depth, and any access hardware you add. We quote and agree on the price before work starts, so there are no surprises on the bill. Call (866) 984-8340 for a free written estimate.
Yes. We are trained and equipped on LiftMaster along with eight other gate-automation brands, including FAAC, Elite, and Mighty Mule. When we install a gate with a LiftMaster operator, we match the unit to the gate’s weight and set the travel limits so it eases into the stop. If your existing LiftMaster is acting up, we service it too. Call (866) 984-8340.
Gate installation is measured and built, so it is scheduled rather than dispatched same day, but a live person answers our phone 24 hours a day and we will get you on the schedule as soon as we can. If your gate is stuck open or hanging off a hinge, our Winchester gate installation team can look at repair options while a new gate is planned. Call (866) 984-8340 any time and we will sort out the next step.
Every gate installation is backed by our written 90-Day Done Right Promise. If something is not right, we come back and make it right – no paperwork, no arguing. That is the same standard we apply to every job, from a hinge adjustment to a full double gate with automation. Call (866) 984-8340 for details on your job.
Clear the driveway and the area around the posts so we can measure and work, and take down anything hanging on the old gate. If you have a gate opener already, tell us the make when you book so we can service it too. We handle the posts, hardware, and haul-away as part of the job. Call (866) 984-8340 to book your free measure.
Schedule Your Gate Installation Service in Winchester Today
If your gate is sagging, dragging, or past the point of repair, let’s get it hung right the first time. We give you a written price before work starts, and every job is backed by the 90-Day Done Right Promise. Call (866) 984-8340 for a free, no-obligation estimate – a live person answers 24 hours a day. Our technicians have up to 13 years of experience, and we will be there when we say.
Written by the team at Ironworks Gate Co.