A Ironworks company - serving Winchester, NV

Driveway Gate in Winchester, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Driveway Gate in Winchester, NV

A driveway gate in Winchester costs $2,400 to $7,800 installed for most residential swing and sliding gates, with automated steel gates at the higher end of that range. We install, automate, and repair the full span: hinges, posts, latches, operators, and access control. A gate that closes square and latches cleanly every single time is the whole job, and that is what Ironworks Gate Co. Winchester delivers.

Winchester homeowners call us most often about a gate that has stopped swinging true, a welder who left a hinge half-finished, or a motor that quit in the middle of the dry season. We handle all three. Our technicians have up to 13 years of experience and are trained on LiftMaster and FAAC automation, so the diagnosis is correct on the first visit and the fix is made then, not scheduled for a second trip.

Every driveway gate job we complete is backed by the 90-Day Done Right Promise, a written guarantee with no paperwork and no arguing. If it is not right, we come back and make it right. Call (866) 984-8340 and a live person answers, day or night.

This page covers driveway gates specifically. For a wider look at the full scope of gate work, see our Gate Installation service, or start with our home page.

When You Need a Driveway Gate

Most of the calls we get from Winchester fall into a few recognizable situations. Here are the ones we see most:

  • The gate drags or scrapes the ground. In Winchester’s hot, dry summers, soil shifts and steel posts settle, so a gate hung two years ago can start to bind. A dragging gate is usually a hinge or post problem, not a gate problem, and it is worth fixing before the operator strains against it.
  • The gate sags at the free end. That sag is a hinge or post failure, not wear and tear you should live with. Left alone, it strains the motor until the motor fails too.
  • The weld has cracked or the frame has rusted through. Older gates in the Winchester area take a beating from sun and dust. We weld and rehang, and we can repair a frame that still has good bones instead of selling you a new one.
  • You want the gate automated. If the gate itself is solid but you are tired of opening it by hand, we install and program an opener. We work with LiftMaster and other leading brands.
  • The opener has stopped or the remote no longer works. We diagnose the operator, the board, the safety sensors, and the access control in one visit. Nine brands are covered, so the correct fix is made the first time.
  • You are adding a gate to a driveway that never had one. New construction, a re-landscaped lot, or a property that finally needs a proper entry. This is a full build: posts, frame, finish, and automation.

Our Driveway Gate Process

Here is how a driveway gate job runs with us, start to finish. The steps do not change whether the job is a repair or a new build.

  1. Phone consultation and site measurement. We ask about the driveway, the slope, and what the gate has to do. Then we come measure the opening and check the gate posts, which is the part most estimates skip. Call (866) 984-8340 to set this up.
  2. Upfront written price before any work starts. You get the full number in writing. No surprises on the bill. If you have another quote, we will give you a free second opinion on it.
  3. Shop prep and materials. Steel is cut, welded, and finished to your opening, and the operator is matched to the gate’s weight and travel. Nothing is ordered before the measurement is confirmed.
  4. Installation and hanging. Posts are set, hinges are aligned, and the gate is hung square and level. We test the swing by hand first, then bring the operator online, set the limits, and check the safety sensors.
  5. Access control and handoff. Keypads, remotes, and sensors are programmed and walked through with you. We do not leave until you can open and close it yourself with confidence.
  6. Written guarantee. The 90-Day Done Right Promise is written and handed to you on the spot. If anything is off in that window, we come back and make it right.

Driveway Gate Pricing in Winchester

Prices in Winchester run higher than in some nearby markets because the sun, dust, and soil movement here are hard on gates and hinges. That is the reason we quote the operator and hardware together, not separately. Here is what the work typically costs:

Job Typical Range
Swing gate installation (steel or ornamental, manual) $2,400 – $5,200
Sliding gate installation (manual) $3,400 – $6,600
Automation added to an existing gate $1,400 – $3,200
Hinge, latch, and post repair $250 – $850
Welding and frame repair $300 – $1,100
Operator board or motor replacement $450 – $1,400

What pushes a job toward the top of the range: the gate size and weight, the slope of your driveway, whether new posts are needed, and the automation brand and features you choose. A simple LiftMaster operator on a level swing gate sits near the low end. A heavy sliding gate with keypad entry on a sloped drive will land near the high end.

We tell you the number before a single bolt is turned. No surprises on the bill, and our standing offers apply: $50 off any repair over $250, a free $89 seasonal tune-up, and a permanent 5% senior and veteran discount. Ask about any of these when you call.

For a broader picture of how gate installations are priced across Winchester, see our Gate Installation page.

FAQs – Driveway Gate

How much does a driveway gate cost in Winchester?

A driveway gate in Winchester typically runs $2,400 to $7,800 installed, depending on size, material, and automation. Manual swing gates sit lower; automated sliding gates with keypad entry sit higher. We give you the exact number in writing before work begins. Call (866) 984-8340 for a free estimate.

Can you fix a driveway gate the same day?

Yes for most repairs. Hinge replacement, latch adjustment, welding, and many operator fixes are done in a single visit. We carry common parts and are trained on nine automation brands, so the fix is usually made the first time. Call ahead and we will tell you what to expect.

Is it cheaper to repair a driveway gate or replace it?

Repair is almost always cheaper when the frame and posts are still solid. A gate with good bones and a bad hinge or a dead operator is a repair job, often $250 to $1,400 depending on the work. Full replacement makes sense when the frame is rusted through or the posts have failed. We give you the straight answer on both, and a free second opinion on any written estimate you already have.

Which gate operators do you service in Winchester?

We service nine leading brands, including LiftMaster and FAAC. That matters on a Winchester driveway: older operators here take heavy sun exposure, and a brand that is hard to source parts for can mean two visits instead of one. Our technicians have up to 13 years of experience and are matched to the equipment. Call (866) 984-8340 and we will tell you what your operator needs.

Why Winchester Homeowners Call Us Back

Most of our customers have lived in their home for twenty years or more and plan to stay. They call rather than click, and they have been let down by a contractor before. We keep that in mind on every job. Upfront pricing before work starts. Background-checked technicians on every visit. A live person answers the phone any hour of the day.

The company that makes a 40-year-old gate close like the day it was hung: that is the standard we hold. Whether your gate needs a new hinge or a full build with an Elite operator, the job is done right, and it is backed in writing. Our standing offers stand: $50 off any repair over $250, a free $89 seasonal tune-up, and a permanent 5% senior and veteran discount.

Find our full service scope on our home page, or reach us directly for driveway gate work in Winchester.

Contact Us for a Free Estimate

Call (866) 984-8340 for a free estimate on your driveway gate. A live person answers, day or night, and we will set up a measurement at a time that works for you. Upfront pricing, a written 90-Day Done Right Promise, and a job done right the first time. That is the whole offer.

Written by the team at Ironworks Gate Co. Winchester, serving Winchester.

Need Gate Repair help in Winchester? Licensed & insured · 60-minute response · free estimates
Call (866) 984-8340
Local Service Coverage

Request a Free Estimate in Winchester

Tell us what you need - Ironworks Gate Co. Winchester responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch