Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Henderson
If you own a custom ornamental or steel driveway gate in Henderson, you already know the metal takes a beating here. We work on Henderson gates every week: hinges that have loosened over years of daily heat cycling, cracked welds at latch points, posts that have shifted in the clay, and old operators that finally quit. We know the difference between a Green Valley iron gate and a newer Anthem installation, and we quote the price before any work starts. Call (866) 984-8340 and a live person will pick up, day or night.

Why Ironworks Gate Co. Winchester Is Henderson’s Preferred Gate Parts & Welding Company
We’ve built our reputation on the kind of gates Henderson homeowners actually own: hand-fabricated ornamental iron and steel, hung on masonry pillars, often paired with a matched intercom, keypad and camera at the street. Our technicians have up to 13 years of experience and are trained on the automation brands that show up most often on Henderson driveways, including LiftMaster, FAAC and Elite.
Response to Henderson is reliable because we treat the whole east valley as home ground. A live person answers every call, 24 hours a day, seven days a week, so a gate that won’t close on a Sunday evening doesn’t leave you waiting until Monday. Every job is protected by our written 90-Day Done Right Promise. If something isn’t right, we come back and make it right. No paperwork and no arguing.
Henderson customers stay with us because we explain what failed and why, then fix the actual cause rather than selling a new operator when the real problem is a loose post. See our full Gate Parts & Welding services if you want the complete scope.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Henderson
These are the parts and welding jobs we handle most across Henderson’s master-planned subdivisions, from Green Valley to Anthem to the older tracts off Boulder Highway.
Hinge Replacement in Henderson
When a heavy ornamental gate drags, the hinge is usually where the wear shows first. We replace worn hinges with properly sized hardware rated for the gate’s weight, then re-hang and realign so the gate swings without catching. On Henderson gates hung on masonry pillars, we also check that the hinge plate hasn’t pulled loose from the steel frame.

Post Replacement in Henderson
A leaning or shifted gate post is often the root cause of sagging, misalignment and premature operator wear. We assess whether the post can be reinforced or needs full replacement, account for the expansive clay soils common in Henderson yards, and set the new post so the gate hangs true. This is the repair that stops the cycle of sagging.

Rail Repair in Henderson
Bent, cracked or separating rails on a steel gate can look cosmetic until the structure weakens. We straighten and repair rails on driveway and courtyard gates throughout Henderson, then check alignment at the latch and strike so the gate seats correctly. A rail repair done right also protects the operator from fighting a twisted gate.

Custom Welding in Henderson
We weld ornamental iron and steel gates on site when possible, matching the original profile and finish so the repair disappears into the gate. Henderson’s thermal expansion and contraction cracks welds at hinge and latch points over time, so we reinforce those stress areas as part of the repair. Custom fabrication and gate modifications are welcome, including intercom and camera mounting brackets.
Trusted Brands We Service in Henderson
We’re certified to service nine major automation brands, including LiftMaster, FAAC, Elite and Mighty Mule, which covers most of what’s already installed on Henderson gates. We don’t carry parts in a truck or stock locally, so we diagnose the failure, identify the right component, and source it. That keeps turnaround quick without a guessing game or a wrong-fit part bolted on. If your operator is a brand we don’t recognize from the driveway, we’ll tell you honestly on the call.

See the difference
Before
After
Before
After
Before
AfterCommon Gate Parts & Welding Problems We See in Henderson Homes
Henderson is a particular place to own a metal gate. Summer highs top 110°F and winter nights drop near freezing, a 40 to 50°F daily swing that works on metal and masonry every single day.
- Cracked welds at hinge and latch points. Daily thermal expansion and contraction fatigue welds over years, and the hinge and latch carry the most stress. A crack you can see is usually a crack you can fix before it becomes a structural failure.
- Failing 1990s operators. In older Green Valley tracts, original operators are finally giving out at the same time. Sun-baked control boards and photo-eye lenses clouded by fine desert dust cause the same intermittent operation as worn mechanical parts.
- Masonry pillar shift. Expansive clay soils move the pillars that many Henderson gates are mounted to, which misaligns the gate and accelerates wear on hinges and latches. The pillar isn’t always the whole story, but it’s often part of it.
- Heat-cycle fatigue at the hinge post. Even when the pillar is stable, the hinge post loosens from daily temperature swings and takes the gate out of square. This is the dual failure mode most generic repair advice misses.
A typical call in Henderson involves a 20-year-old custom ornamental iron swing gate in a Green Valley subdivision that has started to drag and misfire. The homeowner finds the operator unresponsive, but a qualified technician will first check the hinge post for movement caused by heat-cycle fatigue and soil shift, then inspect the operator’s control board and photo-eye lenses for dust and UV damage. The fix usually combines hinge post reinforcement or replacement with cleaning or replacing clouded safety photocells, followed by sag correction and recalibration of the operator.
Pricing for Gate Parts & Welding in Henderson, NV
We quote and agree the price before any work starts, so there’s no surprise on the bill. In Henderson’s market, a typical hinge replacement runs $150 to $320 per hinge, depending on hardware and gate weight. Hinge post reinforcement or replacement usually runs $300 to $650. Rail repair and straightening runs $180 to $450. Custom welding and fabrication is quoted per job, commonly $200 to $600 for a repair and higher for new ornamental work. Latch and lock service typically runs $120 to $280. A failed operator component, like a control board or photo-eye set, generally runs $220 to $550 installed. If the post and the pillar both need attention, we’ll spell out both costs before starting. Estimates are free, and we honor our standing offers: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a 5% senior and veteran discount.
We Also Serve Cities Near Henderson
We work the surrounding communities as well, including Boulder City, Whitney, Paradise and Enterprise. If you’re just outside Henderson, the same pricing and the same 90-Day Done Right Promise apply. You can read more about Gate Parts & Welding in Henderson and the neighborhoods we cover on our city page.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Henderson
Because the hinge is rarely the root cause in Henderson. The sag usually starts at the hinge post, which loosens from daily 40 to 50°F temperature swings, and often at the masonry pillar as well, which shifts in expansive clay soils. Tightening the hinge treats the symptom. We check both the post and the pillar, then reinforce or replace what’s actually moving. Call (866) 984-8340 for a free estimate.
Usually yes, especially if the gate itself is sound. In older Green Valley tracts, the most common culprits are sun-baked control boards and photo-eye lenses clouded by desert dust, and those are repairable without replacing the whole operator. We diagnose first, quote the repair before touching anything, and tell you honestly if replacement makes more sense. Call (866) 984-8340 for a free estimate.
Look for hairline cracks or rust streaks at the hinge and latch points, and listen for a new rattle or grind as the gate moves. Those are the stress points where daily thermal expansion and contraction crack welds first. If you see a crack, stop running the operator until it’s checked; a failed weld can drop a heavy gate. Our technicians inspect and weld on site. Call (866) 984-8340 for a free estimate.
Automatic gates need functioning safety devices, typically photo-eye sensors that stop or reverse the gate when something crosses the path. Those are exactly the components that dust and UV damage here in Henderson, so they need regular testing and prompt replacement. We inspect and replace failing safety edges and photo-eyes as part of the repair. Call (866) 984-8340 for a free estimate.
Ironworks Gate Co. is the gate specialist Henderson homeowners call for ornamental iron and steel gate work, backed by our written 90-Day Done Right Promise and a live person answering the phone 24 hours a day. Our technicians have up to 13 years of experience and are trained on LiftMaster, FAAC, Elite and other major brands. Call (866) 984-8340 for a free estimate.
Whether it’s a sagging Green Valley iron gate, a cracked weld at the latch, or a 1990s operator that finally quit, the metal and the mechanics both get our full attention. Call (866) 984-8340 for a free estimate and we’ll quote the price before any work starts, backed in writing by our 90-Day Done Right Promise.
Written by the team at Ironworks Gate Co.