A Ironworks company - serving Winchester, NV
Gate Parts & Welding in Boulder City, NV | Ironworks Gate Co. Winchester

Gate Parts & Welding in Boulder City - Welded and Fitted, Priced Up Front

Hinges, wheels, tracks and steelwork made to fit your gate rather than forced from a generic kit. Measured, fabricated and fitted, with the price agreed before we cut anything.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Fast, Reliable Gate Parts & Welding Across Boulder City

If your gate has started to drag, stick, or stop halfway, the fix usually comes down to the metal and the parts holding it, not the whole gate. We’re Ironworks Gate Co., and we handle gate parts and welding across Boulder City, from the historic district near the old dam-worker blocks out to the acreage entrances along the edges of town. We know what Boulder City weather does to iron and steel, and we quote the price before we start. Call (866) 984-8340 and a live person answers, day or night.

Professional welding services for gate repairs and metal fabrication in Boulder City, NV

Call (866) 984-8340

Why Ironworks Gate Co. Winchester Is Boulder City’s Preferred Gate Parts & Welding Company

Boulder City homeowners tend to call rather than click, and they remember the last contractor who left a job half done. We work to earn the second call, not just the first. Our technicians have up to 13 years of experience, they’re background-checked and uniformed, and the price is settled before a bolt is turned. If something isn’t right, we come back and make it right under our 90-Day Done Right Promise, in writing.

That matters here because Boulder City’s gates aren’t all alike. A cottage in the historic core may wear the same wrought-iron gate hung in the 1930s, while a spread out toward the edge of town runs a wide swing gate on a long driveway powered by a solar opener. We bring the right parts and the right approach to both, and we’re trained on the leading automation brands so the diagnosis is correct the first time. We serve Boulder City and the surrounding communities from the same local crews, which keeps our response tight. A live person takes your call 24 hours a day, 7 days a week.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Gate Parts & Welding Services in Boulder City

Most of the calls we get in Boulder City come down to a few parts failing at once: hinges that have worn, a post that has shifted, a rail that split or cracked, and welds that let go after years of sun. Here’s how we handle each, and how a real Gate Parts & Welding job gets done right.

Hinge Replacement in Boulder City

A gate that sags or scrapes is often working on worn hinges long past their life. We replace tired hinges with the right weight-rated hardware and check that the frame still hangs true. On original iron in the historic district, we take care to match the profile so the repair blends in.

Hinge Replacement in Boulder City

Post Replacement in Boulder City

When a hinge post pulls loose from its footing, no amount of tightening will hold a wide gate. We re-set or replace the post, anchor it back to solid ground, and re-hang the gate so it swings freely again. That one repair solves most of the sagging that shows up on long rural driveways around Boulder City.

Post Replacement in Boulder City

Rail Repair in Boulder City

Mojave sun and dry air bake and warp frames, and a rail that has cracked will only get worse. We repair or replace damaged rails, straighten bent sections, and re-weld joints that have separated. The gate comes back square and closes cleanly on the post.

Rail Repair in Boulder City

Custom Welding in Boulder City

Some gates need fabrication, not just a part swap. We weld custom brackets, gate frames, and matching replacement sections, and on Boulder City’s historic homes we rehab original wrought-iron and early steel so the gate stays compliant with preservation guidelines. Repairing in place is often the only option that respects those rules.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (866) 984-8340

Trusted Brands We Service in Boulder City

We work on gate hardware and operators from LiftMaster, DoorKing, Elite, and Mighty Mule, among others, so whatever sits on your driveway we can diagnose and put back in service. What sets the work apart is that we don’t need to reach for the wrong part. We know which hinges, latches, and controllers fit which gate, and we make the correct fix on the first visit. For Boulder City homeowners on a wide swing gate or a sliding gate, that means a shorter wait and a gate that actually works when we leave. If you’re not sure what’s on your gate, tell us on the call.

Custom metal gate hardware and welding repair tools on a workbench in Boulder City, NV

Common Gate Parts & Welding Problems We See in Boulder City Homes

  • Solar opener batteries and controllers failing. Sustained heat and monsoon dust wear down solar gate openers, leaving a long rural driveway stuck open or closed. We test the battery and controller and get the operator working again.
  • Sagging wide farm and driveway gates. A gate that hangs low usually points to a hinge post pulled loose from its footing, not a bad panel. We re-anchor the post and re-level the gate so it swings true.
  • Cracked or seized original ironwork. On historic-district homes, age and hard freezes crack and seize hinges on original wrought-iron gates. Repair has to respect preservation controls, so we rehab the ironwork rather than swap panels.
  • Worn latches and locks. Heat and dust work latches and locks loose, so a gate stops latching or the lock won’t turn. We replace the hardware and set it so it catches and locks cleanly.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pricing for Gate Parts & Welding in Boulder City, NV

Here’s a straight look at what this work runs in Boulder City. A hinge or latch replacement typically runs $120 – $280. A hinge-post re-set or replacement usually lands between $350 – $900, depending on footing and access. Rail repair or re-welding runs about $150 – $450. Custom welding and historic-iron rehab on original sections can run $300 – $1,200 or more, since matching a vintage profile takes time. Solar opener parts and controllers add to the total, and emergency calls on a stuck gate carry a modest premium. Every price is quoted and agreed before we start, so there are no surprises on the bill. Estimates are free, and standing offers like $50 Off Any Repair Over $250 and a 5% Senior and Veteran discount apply. Call (866) 984-8340.

We Also Serve Cities Near Boulder City

The same local crews that work in Boulder City also serve Henderson, Whitney, Paradise, and Enterprise. If you’re just outside town, tell us where you are and we’ll get you on the schedule. See more about Gate Parts & Welding in Boulder City.

Serving Boulder City, NV – Our Local Coverage Area

We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Gate Parts & Welding in Boulder City

Let’s Get Your Gate Working Again

If your gate is dragging, stopping mid-travel, or its original iron has cracked, we can help. We handle gate parts and welding for Boulder City homes and acreage entrances, we quote the price before we start, and we back the work with our 90-Day Done Right Promise. Call (866) 984-8340 for a free estimate.

Written by the team at Ironworks Gate Co.

Why Boulder City Chooses Ironworks Gate Co. Winchester

We set the standard for gate parts & welding in Boulder City.

30-60 Min Response

Fast dispatch across Boulder City. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Boulder City

Getting your gate parts & welding handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate parts & welding needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Boulder City - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate parts & welding pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within 60 minutes.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Boulder City Customers Say

Trusted by homeowners across Boulder City and surrounding areas.

★★★★★

"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."

Devon Ingram
★★★★★

"Our slide gate had been dragging for months and getting worse. The chain was stretched and a guide roller had seized. Both replaced, and he reset the limits so it stops properly at each end now."

Veronica Ramirez
★★★★★

"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."

Jamal Dawson

Ready for Gate Parts & Welding in Boulder City?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Boulder City.

(866) 984-8340

Request a Free Estimate in Boulder City

Tell us about your gate parts & welding needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - 24/7 Dispatch