Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Winchester
If a gate on your property is dragging, sagging, or plain stuck, we can help. Our Gate Parts & Welding team works across Winchester on hinge replacement, post replacement, rail repair, and custom welding, and most jobs are finished in a single visit with the price settled before we start. This is a tight town of short setbacks and shared driveways, and we know the working conditions here well enough to bring the right parts the first time. Call (866) 984-8340 and a live person will answer, day or night.

Why Ironworks Gate Co. Winchester Is Winchester’s Preferred Gate Parts & Welding Company
Winchester homeowners call us because we show up when we say we will and we don’t leave a gate half-fixed. Our technicians have up to 13 years of experience on the tools, and every job is backed by our written 90-Day Done Right Promise – no paperwork, no arguing. If it isn’t right, we come back and make it right.
Our technicians arrive background-checked and uniformed, and they work in your yard the way they’d work in their own mother’s. That matters on a lot where the gate is the only thing between the street and the back door. We’re trained on nine gate-automation brands, so whether there’s a Ghost Controls operator on the post or an older Mighty Mule unit, we make the correct fix on the first visit rather than guessing and ordering twice.
We keep the pricing straight too. You get an upfront number before a single bolt is turned, and that’s the number on the bill. Right now we’re running $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a standing 5% senior and veteran discount.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Winchester
Winchester’s gates take a beating. The desert sun, the dust that works into every moving part, and the shifting soil under old footings all shorten the life of hardware that was installed decades ago. Here’s what we handle most.
Hinge Replacement in Winchester
A sagging gate almost always gets blamed on the panel when the hinge or the post is the real problem. We replace worn hinges, correct the alignment, and re-hang the gate so it swings or slides the way it was meant to. On the 1950s to 1970s wrought-iron and chain-link gates common around Winchester, this is the repair we do most.

Post Replacement in Winchester
When a hinge post has pulled out of an undersized footing, no amount of tightening will fix it – the post has to come out. We set a properly sized post with a footing that suits the gate’s weight and the soil here, then re-hang the gate on it. This is the fix that actually holds on short-setback Winchester lots where the original footing was never engineered for the load.

Rail Repair in Winchester
Bent, cracked, or rusted-through rails get straightened, spliced, or replaced so the gate keeps its shape and its strength. We match the existing ironwork where we can, which keeps a repair looking like part of the gate instead of a patch bolted on.

Custom Welding in Winchester
Not every gate fits a catalog part. We weld custom brackets, reinforcements, and repairs on site, including the wind-load anchoring that county review expects on gates along the Decatur Boulevard and Desert Inn Road corridors. If a piece has to be fabricated to fit, we fabricate it.
Trusted Brands We Service in Winchester
We’re trained and equipped on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We don’t claim to keep a warehouse of parts sitting in Winchester – nobody honest does – but we know these systems well enough to diagnose the right component and get it ordered fast. That means a DoorKing keypad or an Elite operator gets the correct fix instead of a workaround. Fast turnaround, done right the first time.

See the difference
Before
After
Before
After
Before
AfterCommon Gate Parts & Welding Problems We See in Winchester Homes
After enough jobs in this town, the same failures come up again and again. Here’s what we run into.
- Hinge posts pulling out of undersized footings. Original gates from the 1950s through the 1970s were often hung on posts that were never big enough for the panel, and the desert soil shifts under them. The gate sags, but the post is what failed.
- Dust and sand packing into sliding-gate tracks and rollers. Wind-driven grit binds the gate until it stalls the operator or trips the loop detector. Regular adjustment keeps it moving.
- County right-of-way and wind-load anchoring failures. Gates installed to City of Las Vegas standards can fail county review on Winchester’s Strip-adjacent parcels that back onto residential streets. We see this along the shared driveways off Decatur and Desert Inn.
- Heat-warped finishes and binding metal. Intense summer sun and 100°F+ heat expand and warp gate frames, and winter freezes plus occasional heavy rain speed corrosion at the hinges and footings.
Pricing for Gate Parts & Welding in Winchester, NV
Here’s what this work typically runs in the Winchester market. A hinge replacement usually lands between $150 and $320 for a pair, depending on how much re-alignment the gate needs. Post replacement runs $350 to $750, since the old post has to come out and a properly sized one set with a new footing. Rail repair is $120 to $400 depending on how much ironwork is involved, and custom welding starts around $95 an hour with a minimum call-out. What moves the number is access, gate weight, and whether the gate has to be taken down to do the work. You’ll get a firm written estimate first and a free second opinion on any estimate you’ve already got.
We Also Serve Cities Near Winchester
Winchester sits in the middle of the valley, and we work the neighborhoods around it as well. If you’re just outside the line, we also cover Paradise, Las Vegas, Whitney, and Sunrise Manor. Wherever you are, the same crew, same pricing, same written promise. Reach out and tell us where the gate is.
Serving Winchester, NV – Our Local Coverage Area
We serve Winchester and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Winchester
In Winchester, gate permits and inspections come from Clark County, not the City of Las Vegas, because Winchester is unincorporated. That’s the wrinkle on a lot of jobs here: a gate that passed a Las Vegas inspection can still fail county review over right-of-way clearance and wind-load anchoring, especially on shared driveways and Strip-adjacent parcels. Call (866) 984-8340 and we’ll walk you through what your project needs.
The post is usually the real failure point, not the hinge. On older Winchester gates, the original post was undersized for the panel and its footing has shifted in the sun-baked soil, so tightening the hardware just pulls the post further out. A qualified pro checks the post and footing first, corrects the sag, then re-hangs or re-welds the hinges. Call for a free estimate.
It’s usually the rollers and the track, not the operator. Wind-driven dust and sand pack into the track and rollers on Winchester properties and bind the gate until it stalls the operator or trips the loop detector. The gate gets cleaned, adjusted, and the rollers replaced as needed; only then do we look at the operator. Call (866) 984-8340 for an exact quote – estimates are free.
Usually yes, if the gate and post are sound. The panel gets re-hung and the hinges corrected first, then we add an operator with the rack and pinion and safety photocells brought up to UL 325 entrapment protection. If the post is failing, that has to be fixed before any motor goes on, so we check it first. Call us to schedule a free measure and a written price.
A slide gate is usually the better fit where there’s no room for a swing to clear. On Winchester’s tight shared driveways and short setbacks, a swing gate can foul a neighbor’s vehicle or the right of way, while a slider travels along the fence line. We’ll measure your opening and tell you which one the county will actually approve. Call (866) 984-8340 and we’ll set up a free measure.
When a gate in Winchester needs welding, new hinges, or a post that finally holds, we’re ready to take the call. We’ll quote it upfront, agree on the price before any work starts, and back it with our written 90-Day Done Right Promise. Reach out to the team and let’s get your gate closing right again. Call (866) 984-8340 for a free estimate.
Written by the team at Ironworks Gate Co.