Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Sunrise Manor
If your gate is sagging, dragging, or hanging off a post that finally gave up, we can help. We handle gate parts and welding for homeowners across Sunrise Manor, from the wide RV gates off Lake Mead Boulevard to the ornamental swing gates tucked behind block walls near Las Vegas Boulevard North. The work here isn’t cookie-cutter. Much of this community was owner-built and sits in unincorporated Clark County, so every weld and hinge repair tends to be a one-off. Our technicians have up to 13 years of experience, and we settle the price with you before any work starts. Call (866) 984-8340 and a live person will pick up, day or night.

Why Ironworks Gate Co. Winchester Is Sunrise Manor’s Preferred Gate Parts & Welding Company
Sunrise Manor homeowners tend to keep their gates a long time and call the same company back when something fails. That’s the reputation we work to keep. We’re plainspoken about what your gate needs, we tell you the price up front, and every job carries our written 90-Day Done Right Promise: if it isn’t right, we come back and make it right. No arguing, no paperwork games.
We know this part of the valley. A good share of the gates in ZIP 89110 were hung by the homeowner decades ago, not a manufacturer, and they don’t match any parts catalog. When you call, we ask what the gate is made of and how it’s hung before we send anyone out, so the right fix arrives on the first visit. Our technicians are background-checked and trained on the automation brands common on these driveways, including LiftMaster, Linear, and Ghost Controls. Call (866) 984-8340 for a free estimate.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Sunrise Manor
Our full range of gate parts and welding work is covered on our Gate Parts & Welding page. Here in Sunrise Manor, three jobs come up again and again: posts, welds, and hinges. The desert heat, UV, monsoon dust, and caliche-hard soil all take a toll, and they take it faster than in milder places.
Post Replacement
A gate that sags usually has a post problem, not a hinge problem. Caliche soil and the seasonal heave-and-settle cycle pull shallow-set posts out of plumb, and once that happens the gate drags. We reset or replace the post properly, set it deep, and brace it so the panel hangs true again. This is the fix that most often gets a 40-year-old gate closing like the day it was hung.

Custom Welding
Because so many Sunrise Manor gates were built by the homeowner rather than a manufacturer, replacements are rarely off-the-shelf. We weld the brackets, arms, and frames on site to fit what’s actually there. Whether it’s thin-wall tube that’s cracked at a joint or a twisted chain-link frame, we repair the metal instead of selling you a whole new gate.

Hinge Replacement
Hinges seize here. The heat cooks the grease out and the dust works its way in, and a hinge that won’t pivot forces the whole gate to fight its own frame. We replace worn hinges, check the post underneath, and re-align so the gate swings free. Tightening a hinge on a bad post only buys you a few weeks.

Rail Repair and Gate Rollers
On slide gates, worn rollers and bent rails cause the same drag a bad hinge does on a swing gate. We straighten or replace rails, swap rollers, and re-align the track so the gate travels clean. Call (866) 984-8340 to get a written estimate before we start.
Trusted Brands We Service in Sunrise Manor
We’re trained and equipped on nine gate-automation brands, including DoorKing, Elite, Ghost Controls, and Mighty Mule, along with LiftMaster, FAAC, BFT, Linear, and Viking. We don’t keep a parts warehouse or stock brand parts locally, so we order what your gate needs and schedule the visit around it. That’s honest, and it keeps the price fair. For most repairs, we diagnose on the first visit and get the fix done in a single trip. Whatever opener is on your driveway, we’ve likely seen it and know how to service it correctly.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Parts & Welding Problems We See in Sunrise Manor Homes
A typical parts-and-welding call here often starts with a builder-grade operator bolted onto a gate that was installed as a manual gate years earlier. The arm has been fighting a panel with no proper hinge-post footing, and eventually a gear strips or the arm bracket tears out of thin-wall tube. These are the patterns we see most:

- Builder-grade operators on manual gates. A LiftMaster or Linear arm added to a gate never built for automation, so the bracket or gear fails first. The real fix is usually re-setting the hinge post, not replacing the operator.
- Shallow-set posts in caliche. Posts that heaved and settled leave lightweight ornamental and chain-link panels sagging or twisting, especially after a monsoon gust.
- Seized hinges, latches, and rollers. Heat and UV cook the lubricant out and dust finishes the job, so latches and rollers stop moving cleanly.
- No power or conduit run from the build. When a gate is automated after the fact, the missing line becomes the bottleneck, pushing homeowners toward a solar opener or a trenched run.
Pricing for Gate Parts & Welding in Sunrise Manor, NV
Here’s what the work typically runs in the Sunrise Manor market, so you have a real number before you call:
- Hinge replacement: typically $175 – $350 per gate, depending on how many hinges and whether the post needs attention.
- Post replacement: usually $350 – $750, driven by post depth, soil, and whether concrete or block wall is in the way.
- Custom welding and bracket repair: generally $200 – $500, based on the number of welds and site access.
- Gate roller and rail repair on slide gates: around $200 – $450.
- Automation retrofit with a power or conduit run: runs higher, often $1,200 – $3,000 once trenching and entrapment protection are included.
The price is quoted and agreed before a single bolt is turned, so the bill matches the estimate. Estimates are free. We also offer $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a standing 5% discount for seniors and veterans. Call (866) 984-8340 for an exact quote.
We Also Serve Cities Near Sunrise Manor
We serve homeowners in Sunrise Manor and the surrounding communities, including Whitney, Winchester, Las Vegas, and North Las Vegas. If you’re just over the line in one of those areas, the same written promise and upfront pricing apply. Call (866) 984-8340 and we’ll sort out which area you’re in and get you a free estimate.
Serving Sunrise Manor, NV – Our Local Coverage Area
We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Sunrise Manor
The gate’s structure has to be able to carry automation before the operator goes on. On a manual swing gate, that usually means checking the hinge post footing and the frame strength, since a builder-grade arm bolted to a panel never built for it will strip a gear or tear the bracket out. Entrapment protection also has to be in place. In Sunrise Manor, the missing piece is often a power and conduit run that was never put in during the build, which can push you toward a solar opener or a trenched line. Call (866) 984-8340 for a free estimate on your specific gate.
Because the problem is usually the post, not the hinges. Caliche-hard soil and the seasonal heave-and-settle cycle pull shallow-set posts out of plumb, and tightening a hinge on a moving post only holds for a few weeks. The lasting fix is re-setting or replacing the hinge post so the panel hangs true, then re-aligning the hinges. Call (866) 984-8340 and we’ll take a look and give you a written price.
Yes. Any automated gate needs entrapment protection such as photo-eyes or edge sensors that actually work, per UL 325. We check that the sensors function under the gate’s real travel before we call an automation job done. If your existing operator is running without working protection, that’s a repair worth scheduling sooner rather than later. Call (866) 984-8340 for a free estimate.
In most cases it can be repaired rather than replaced. A lightweight chain-link or ornamental panel twisted off a shallow post is usually a weld-and-reset job: straighten the frame, re-weld the joints, and re-set the post that let it twist. Replacing the whole gate is often unnecessary. We’ll tell you plainly which fix makes sense for your gate. Call (866) 984-8340 for a free estimate.
Sunrise Manor is unincorporated Clark County, so gate and fencing work answers to county permitting norms, and whether a permit is needed depends on the scope and whether the gate ties into a structure. Because there’s no architectural review committee here, nobody dictates your gate style or color, but the county still cares about structural and safety requirements. When you call, we’ll walk through what your particular job involves. Call (866) 984-8340 for a free estimate.
If your gate is dragging, sagging, or fighting its operator, don’t wait for it to fail completely. We serve Sunrise Manor with upfront pricing settled before any work begins, a written 90-Day Done Right Promise, and live phone support around the clock. Call (866) 984-8340 for a free estimate and we’ll get your gate swinging right again.
Written by the team at Ironworks Gate Co.