Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Motor & Opener Across Henderson
If your gate has stopped opening on command, we can help. Ironworks Gate Co. Winchester handles gate motor and opener repair, replacement, and installation for Henderson homeowners, from the custom iron driveways of Green Valley to the high-end estates up in Anthem and MacDonald Ranch. We know this city’s gates because we know this city’s ground: the expansive clay under those masonry pillars and the daily temperature swing that works on metal year-round. When a Henderson gate quits, we send an experienced technician, quote the price before any work starts, and back the job with our written 90-Day Done Right Promise. Call (866) 984-8340 and a live person will answer.

Why Ironworks Gate Co. Winchester Is Henderson’s Preferred Gate Motor & Opener Company
Henderson homeowners tend to stay in their homes for decades, and they call back the company that did the job right. That’s how our reputation here has been built: one driveway gate at a time, in neighborhoods across 89015, 89002, and 89052, with referrals passing between neighbors who’ve compared notes on who shows up and who doesn’t. Most of the work we do in Henderson is on heavy custom ornamental and slide gates, and that requires a technician who can read the frame and the footing, not just swap a motor.
Our technicians carry up to 13 years of experience, are background-checked and uniformed, and are trained across nine major automation brands, so we diagnose correctly on the first visit. Our phone lines are answered by a live person 24 hours a day, 7 days a week. No voicemail trees. No waiting until Monday. When you call about a gate stuck open on a Henderson evening, someone picks up and we get a technician moving.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Motor & Opener Services in Henderson
Motor Repair
Most Henderson gate failures we see aren’t the motor at all. On the area’s custom ornamental swing gates, a hinge post that has crept a half-inch in the clay soil or a weld loosened by 20 to 30 years of heat cycling will make a perfectly good operator bind, drift, or drag. We check the post, the hinges, and the frame before we condemn the motor, then correct the sag and service the operator. A typical swing-gate motor repair in Henderson runs $180 – $420, and we confirm the number with you before a bolt is turned.

Linear Motor
Linear arm operators are common on the heavy ornamental driveways around Green Valley and Anthem, and they take a beating from sun and fine desert dust. When a Linear motor starts stalling or reversing halfway, it’s often a worn arm or a control board baked by years of 110°F summers. We carry the parts and experience to service Linear units correctly, and we reset travel limits and test the safety reverse so the gate behaves the way it should.

Slide Motor
Heavy slide gates on large Henderson lots put real load on the operator, and the rack and pinion wears in step with airborne dust working into the track. We replace worn rack sections, service the motor, and check the loop detector that tells the gate a car is present. Slide motor service in Henderson typically runs $220 – $480, quoted up front.

Intercom Integration
A gate at the end of a long Henderson driveway needs a working intercom, not a keypad that leaves visitors guessing. We integrate intercom and camera entry with the operator so a guest can ring and you can see and answer from inside the house. This work is measured and scheduled rather than same-day, and you’ll have a written price before we start. For the full picture of what we do, see our Gate Motor & Opener service page.
Trusted Brands We Service in Henderson
We’re trained and equipped to service the brands that actually sit on Henderson driveways: LiftMaster, FAAC, BFT, Linear, Elite, Mighty Mule, and more across nine major automation lines. That matters because a technician who knows the brand knows its failure patterns, its control boards, and where to look first. We don’t claim to stock every part locally, but we know what these units need and we get the right parts for the job so a repair isn’t left half-finished for a week. Whatever unit is on your Henderson gate, we can service it and make it run right.
Common Gate Motor & Opener Problems We See in Henderson Homes
- Sagging and dragging swing gates. In Henderson’s master-planned subdivisions, a gate that sags is usually a sign that the hinge post has shifted in the expansive clay combined with heat-cycle fatigue loosening the welds. A new motor won’t fix it; the frame and footing need attention first.
- Sun-baked control boards on 1990s operators. The original operators installed in older Green Valley tracts are finally failing at once, and the cause is often a control board cooked by decades of desert summers rather than the mechanical parts.
- Dust-clouded safety sensors. Fine desert dust coats the photo-eye lenses, and the gate reverses for no reason or refuses to close. Cleaning and realigning the sensors often brings it back.
- Worn rack and pinion on slide gates. Airborne dust and relentless UV wear the track components on heavy slide operators, so the gate grinds or slips. Replacing the worn rack alongside the service gets it running quietly again.
Pricing for Gate Motor & Opener in Henderson, NV
Here’s what this kind of work generally costs in Henderson. A motor repair runs $180 – $420. A new motor installation on a standard swing gate runs $650 – $1,400, while a heavy custom ornamental gate with intercom integration can reach $1,800 – $3,200. A seasonal tune-up is a flat $89, and you can take $50 off any repair over $250. What drives the number is gate weight, operator brand, whether the footing or frame needs correction, and how much of the control hardware has aged out. We settle the price with you before any work begins, so the bill matches the quote. Estimates are free, and we’ll give you a second opinion on any written estimate at no charge.

See the difference
Before
After
Before
After
Before
AfterWhy Henderson Gates Fail Differently: Clay, Heat, and Heavy Iron
Here’s the local insight that changes how we diagnose a failing gate. Because Henderson’s 1990s and 2000s master-planned tracts, especially Green Valley and Anthem, were built with custom ornamental iron gates mounted on masonry pillars set in expansive clay, operator failures here often trace back to a shifting post footing rather than the motor itself. The clay swells and contracts with moisture, and the daily 40 to 50°F desert temperature swing pushes the metal frame through another cycle of expansion and contraction every single day. Over 20 to 30 years, hinges loosen, welds crack, and pillars tilt just enough to put the gate out of square. That’s why a stock-operator swap alone won’t fix a gate that’s been dragging for months.
On a typical Henderson heavy ornamental swing gate, the operator runs but the gate drifts or drags. A qualified local pro typically performs sag correction at the hinge post, verifies the post footing, then services the operator: checking the sun-baked control board, cleaning dust-clouded safety photocells, and resetting limits on the LiftMaster, FAAC, or BFT unit. On slide gates, worn rack and pinion and a failing loop detector are replaced alongside the operator service so the gate runs silently again. That sequence, footing first, motor second, is what makes a heavy custom gate run quietly for years instead of months.
We Also Serve Cities Near Henderson
Homeowners in nearby communities call us too. We serve Henderson, and we also work in Boulder City, Whitney, Paradise, and Enterprise when a gate needs motor service, repair, or a new operator installed on a heavy ornamental frame. Same written guarantee, same up-front pricing, whichever side of the valley you’re on.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Motor & Opener in Henderson
It’s usually the gate, not the motor. On Henderson’s custom ornamental gates, a hinge post shifted in the clay and heat-cycle fatigue loosening the hinges will make a healthy motor drag, so we check the frame and footing before we touch the operator. Call (866) 984-8340 for a free estimate and we’ll tell you which it is.
Because they were installed in the same era and have all endured the same decades of desert summers. The sun-baked control boards in those original Green Valley operators are reaching the end of their life at the same time, so the failures cluster. We service and replace them across the brand lines we handle; call (866) 984-8340 for a quote.
Yes, safety reversing sensors are a required safety device on any automated gate, and they need to be working. In Henderson, fine desert dust clouds the photo-eye lenses and causes the gate to reverse for no reason or refuse to close, so cleaning and realigning them is part of the service. Call us and we’ll test yours and tell you straight.
It can, if the post, frame, and welds are set right and the operator is dialed in. A heavy iron gate on a shifting Henderson pillar won’t stay quiet on a motor swap alone, but proper footing correction, hinge and weld service, and correct limit settings will keep it running smooth. Call (866) 984-8340 and we’ll give you an honest written estimate.
We service nine major brands, including LiftMaster, FAAC, BFT, Linear, Elite, and Mighty Mule, which covers most of the operators on Henderson gates. If it’s not on our list, call and ask; we’ll tell you before we schedule. Estimates are free at (866) 984-8340.
Get Your Henderson Gate Working Again
Whether your gate is dragging on a shifted pillar, your Linear motor is stalling, or your 1990s Green Valley operator finally gave out, we can help. Ironworks Gate Co. Winchester quotes the price before any work starts and stands behind every job with our written 90-Day Done Right Promise. A live person answers around the clock. Call (866) 984-8340 for a free estimate.
Written by the team at Ironworks Gate Co.