Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Whitney
Most gates in Whitney aren’t new builds. They’re older steel, wrought-iron, or chain-link gates hung years ago on slabs that have been moving ever since. That’s the work we know best: deciding what can be retrofitted, what needs to be rehung, and when replacement is the cheaper answer. We connect Whitney homeowners with independent local gate professionals who work the 89122 corridor every week, reach this part of the east valley quickly, and quote a written price before a single bolt is turned. Call (866) 984-8340 to set up a free estimate.

Why Ironworks Gate Co. Winchester Is Whitney’s Preferred Gate Installation Company
Whitney homeowners call us because they’ve already had one contractor promise a reset and never come back. Our technicians have up to 13 years of experience on driveway and estate gates, and every job is protected by a written 90-Day Done Right Promise. If something isn’t right, we come back and make it right. No paperwork, no arguing.
Whitney customers remember the last call that went unanswered, so a live person picks up our phone 24 hours a day, every day. When you call about a dragging swing gate on a Boulder Highway lot or a pedestrian gate that won’t latch in the 89122 ZIP, we listen to the details and schedule the visit. Technicians arrive background-checked and uniformed, working in your yard the way they’d work in their own mother’s.
Upfront pricing is settled before work starts, so the price you agree to is the price on the bill. That’s the part Whitney residents tell us they care about most.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Installation Services in Whitney
Driveway Gate Installation in Whitney
In Whitney’s wide-lot parcels, the driveway gate is usually the first thing that fails because the slab under it has shifted. We set new driveway gates on properly founded posts so they stay plumb through a Mojave summer, and we rehang existing ones when the panel is still sound. On wider lots along Boulder Highway we often see gates that span fifteen feet or more, which puts every bit of stress on the footing.

Swing Gate Installation in Whitney
Swing gates make up most of the older housing stock here, and a swing gate that drags is usually a hinge post problem rather than a hinge problem. We check plumb on the post and footing before recommending anything, then either re-set the post and rehang the gate or correct the sag with new hinges. On automatic swing gates we verify a working safety edge or photocell before handing it back.

Sliding Gate Installation in Whitney
Sliding gates need a level track and a solid anchor, both of which can be a challenge on settling ground. We set tracks so monsoon runoff doesn’t undermine them, and we pair them with operators that accept modern accessories. If an old operator board won’t take a new keypad or loop detector, we tell you straight and price the alternative.

Security Gate Installation in Whitney
Security gates on manufactured-home parks and shared block-wall entries are common in 89122. These often sit on cracked concrete where the post has moved, so we correct the footing first and hang the gate so the latch lines up every time. Pedestrian security gates get the same treatment, hinge post verified before anything else.
Trusted Brands We Service in Whitney
We’re trained and equipped on nine gate-automation brands, including LiftMaster, DoorKing, and Mighty Mule. That matters in Whitney because much of the existing hardware here is older LiftMaster and Linear equipment whose control boards no longer accept modern safety devices without an adapter or a replacement. Because our technicians know these brands well, the correct fix gets made on the first visit. We don’t stock parts locally; we diagnose, order what’s needed, and get back to you with a written price. Call (866) 984-8340 for an exact quote.

Common Gate Installation Problems We See in Whitney Homes
Most gate problems that look like hardware failures in Whitney’s older wide-lot parcels are actually out-of-plumb hinge posts caused by cracked, settling driveway slabs and monsoon runoff. The hardware is often fine while the post footing has moved. Here’s what we run into:
- Out-of-plumb hinge posts on cracked slabs. The gate binds and the latch misaligns even though the panel itself is sound. Checking plumb on the post and footing comes before any hardware swap.
- Obsolete operator control boards. Older LiftMaster, Linear, and similar units that no longer accept modern safety photocells or keypad entry accessories. Sometimes an adapter works; sometimes the board has to go.
- Heat and UV stress. 100°F-plus summers seize hinges and dry-split wood or metal gate frames. A seasonal tune-up keeps a hinge from becoming a post problem.
- Monsoon and freeze cycles. Runoff undermines footings, then winter freezes stress latches, loop detectors, and operator arms. Gates hung before modern safety requirements deserve a closer look.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Installation in Whitney, NV
A typical driveway gate installation in Whitney runs $1,800 – $4,500 depending on width, material, automation, and footing work. A pedestrian or security gate usually lands between $650 and $1,600. Re-setting a hinge post and rehanging an existing swing gate runs $350 – $900, and an operator retrofit with modern safety devices runs $500 – $1,200. The post condition is the biggest variable on older parcels. Every price is quoted and agreed before work starts, so nothing shows up on the bill that you didn’t approve. Call (866) 984-8340 for a free estimate.
We Also Serve Cities Near Whitney
Whitney is one of several east-valley communities we cover. We also work with homeowners in Sunrise Manor, Winchester, Paradise, and Las Vegas. If you’re searching for Gate Installation in Whitney or the surrounding area, our Gate Installation team can help.
Serving Whitney, NV – Our Local Coverage Area
We serve Whitney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Installation in Whitney
Usually not. In most Whitney cases the gate panel is sound and the hinge post has shifted on a settling slab, so re-setting the post and rehanging the gate solves the problem for far less than a new build. A qualified pro checks plumb first. Call (866) 984-8340 for an exact quote – estimates are free.
Often yes, but it depends on the board. Older LiftMaster and Linear units sometimes accept photocells and edges with an adapter, and sometimes they don’t. We test before we promise. Call (866) 984-8340 and we’ll tell you straight.
Because the ground moved, not the gate. Cracked driveway slabs and monsoon runoff push the hinge post footing out of plumb, and the gate binds as a result. Whitney’s wide-lot parcels see this constantly because the slab under the gate was poured decades ago.
Repair is usually the better answer when the panel and posts are still solid and only the footing has shifted. Replacement makes more sense when the metal has rusted through or the panel is warped. We give a written comparison on both.
Yes. 100°F-plus summers seize hinges and dry out frames, and winter freeze cycles stress latches, loop detectors, and operator arms. A tune-up before summer and before winter keeps the hardware working. Call (866) 984-8340 for an exact quote.
Contact Us for Gate Installation in Whitney
Whether you’re rehanging an older swing gate on a settling slab or replacing an operator board that no longer takes modern safety devices, we’ll give you a written price before work starts. A live person answers our phone any hour, any day. Call (866) 984-8340 for a free estimate on gate installation in Whitney, and we’ll help you decide what can be retrofitted and what’s worth replacing.
Written by the team at Ironworks Gate Co.