Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Motor & Opener Across North Las Vegas
If you live on the acreage side of North Las Vegas, your gate motor is the one piece of equipment that has to work every single day, at 105 degrees, on a gate 20 feet wide. That’s a different job than fixing a handyman gate. We know the long driveways in the 89084 and 89086 belt, the RV pads off North Las Vegas’s block walls, and the way a sun-baked control box quits before the motor ever wears out. Our Gate Motor & Opener work is built for exactly that. Call (866) 984-8340 and a live person answers, any hour.

Why Ironworks Gate Co. Winchester Is North Las Vegas’s Preferred Gate Motor & Opener Company
North Las Vegas homeowners don’t want a sales pitch. They want the gate fixed and a price they agreed to before a bolt got turned. That’s the whole model here: an upfront price, agreed in writing, then the work done. Most jobs are finished in a single visit because our technicians have up to 13 years of experience and we’re trained on nine gate-automation brands, from DoorKing to Mighty Mule, so the correct fix goes on the first trip.
Being a dedicated gate company matters in North Las Vegas because the failure modes here are specific. We know that the control box bolted to a cinderblock wall at the edge of a North Las Vegas driveway sits in unshaded sun for most of the year, and that the board and standby battery inside cook long before the operator gear does. We know the sand that rolls through on a monsoon afternoon finds every bottom-track roller on the block walls in North Las Vegas’s newer subdivisions. That local read is most of the diagnosis.
Every completed job is backed by our 90-Day Done Right Promise, written, no arguing, the same care on the 400th job as the first. A live person answers the phone around the clock, and you’ll get a real answer, not a callback queue.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Motor & Opener Services in North Las Vegas
The sub-services that matter most on North Las Vegas acreage and side-yard gates are the ones tied to power, span, and heat. Here’s how we handle the four you’ll call about most.
Motor Installation for Remote Acreage Entrances
On a long rural driveway where pulling mains power out to the gate is impractical or just plain expensive, solar power with a properly sized operator is often the right call. We size the panel and battery to the actual duty cycle of your gate, not a box-store assumption, and match the operator to the gate’s weight and travel. On the wide farm and RV gates around the 89086 belt, a heavy-duty sliding operator is usually the difference between a gate that works for years and one that fights the sun.

Motor Repair
When a North Las Vegas operator stops mid-travel or drifts open and won’t latch, the fault is often upstream of the motor itself. We power-cycle the operator, test the safety photocell and loop detector, and check the standby battery and control board before recommending a replacement. Sun and blowing dust do most of the damage here, and a repair that addresses the real culprit is cheaper than a motor you didn’t need.

Linear Motor Service
Linear operators are common on North Las Vegas tract-home driveway gates and HOA entry gates, and they’re reliable when the mounting and the safety edges are right. We service Linear units, re-align the photocells after a dust storm has knocked them out, clean the track, and confirm entrapment protection works before we leave. If the housing has no shade, we talk about a simple sun shield, since that’s often what kills the board.

Slide Motor Service
Wide sliding gates on rack and pinion are the workhorse of North Las Vegas RV and acreage side yards, and they take a beating from sand in the bottom track. When a wide slider stalls or opens partway, the problem is often seized rollers plus a tired board. We free and re-align the track, test the operator under load, and set the travel limits so the gate actually latches closed.
Trusted Brands We Service in North Las Vegas
We’re trained and equipped on nine gate-automation brands, and on North Las Vegas gates you’ll most often see LiftMaster and DoorKing on driveway and entry operators, with Mighty Mule and Elite turning up on acreage and side-yard sliders. Knowing the brand means the correct fix, and the right part, on the first visit rather than a guess and a second trip. Call (866) 984-8340 and tell us what’s on the gate; we’ll sort out the brand.

See the difference
Before
After
Before
After
Before
AfterCommon Gate Motor & Opener Problems We See in North Las Vegas Homes
- Sun-cooked control boards and swollen backup batteries. The metal control box bolted to a block wall turns into an oven in a North Las Vegas summer, and the Logic board and standby battery often fail before the operator gear ever wears out. That’s why the same board keeps dying when nothing else seems wrong.
- Sand-seized bottom-track rollers. Blowing dust and monsoon grit pack into the bottom track on stucco-and-block sliding gates, stalling the rack and pinion. A gate that binds and stalls is usually fighting the track, not the motor.
- Photocells knocked out of alignment. A dust storm or a hit from a vehicle nudges the safety beam off target, and the operator refuses to close. It reads like a dead motor but it’s an easy re-align.
- High-wind sag at the hinge post. Occasional high-wind events rack lightweight builder swing gates, and the stress shows up first at the hinge post, where sag actually starts. Left alone, the operator strains against a gate that’s leaning.
A typical acreage-side call in the 89084 and 89086 belt starts with a sliding RV or driveway gate that opens partway and stops, or drifts open and won’t latch. The usual culprit is a baked control board or a dead standby battery inside a sun-exposed housing, often paired with sand-seized rollers and a photocell knocked out of alignment. A qualified pro power-cycles the operator, tests the safety photocell and loop detector, replaces the board or battery, cleans and re-aligns the track, and confirms entrapment protection works before leaving. We do exactly that, and we fix the shade problem so the new board isn’t next summer’s repeat call.
Pricing for Gate Motor & Opener in North Las Vegas, NV
Here’s what gate-operator work typically runs in North Las Vegas. A control board or standby battery replacement on a sun-exposed operator usually runs $180 to $340. A warranty-era motor repair, including track and roller service, typically runs $150 to $400. A full operator or motor installation on a sliding RV gate runs $900 to $2,400, and a solar-powered setup for a remote acreage entrance runs $1,400 to $3,200 depending on panel, battery, and gate weight. Wide, heavy farm gates and HOA entry operators land at the higher end. Every price is quoted and agreed before any work starts, so the invoice matches the estimate. Ask about our $50 Off Any Repair Over $250 and a free second opinion on any written estimate. Call (866) 984-8340 for an exact quote; estimates are free.
We Also Serve Cities Near North Las Vegas
Gate operator work spills across the north valley lines, and we cover the nearby cities that border North Las Vegas, including Las Vegas, Sunrise Manor, Winchester, and Whitney. If your gate sits just outside the North Las Vegas line, call anyway; the heat and dust don’t check zip codes. You can find more about our North Las Vegas service, or reach the broader Gate Motor & Opener team for any question.
Serving North Las Vegas, NV – Our Local Coverage Area
We serve North Las Vegas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Motor & Opener in North Las Vegas
Yes, a properly sized solar operator can run a wide farm gate in North Las Vegas, but it has to be sized to the gate’s weight and how often it cycles. The failure we see is an undersized panel and battery installed for a light gate, then asked to move a heavy acreage slider through a desert summer. A pro sizes the panel, battery, and heavy-duty operator together so it holds up. Call (866) 984-8340 and we’ll walk through your gate and driveway setup.
Because the metal control box bolted to a block wall traps summer heat and cooks the Logic board and backup battery before the operator itself wears out. North Las Vegas summer highs well above 100°F, with sun on that housing most of the year, accelerate it. The fix that lasts is replacing the board and adding shade or a sun shield to the housing so the new one isn’t a repeat job. Call (866) 984-8340 for an exact quote; estimates are free.
Blowing sand usually seizes the bottom-track rollers and knocks the safety photocell out of alignment, so the gate binds and then won’t close. On North Las Vegas stucco-and-block sliding gates, grit packs into the track and stalls the rack and pinion. A pro cleans and re-aligns the track, frees the rollers, and re-targets the photocell. Call (866) 984-8340 and we can get eyes on it.
On a wide North Las Vegas slider, a gate that opens halfway and stops is often the control board or a tired standby battery cutting out under load, though seized rollers can cause the same symptom. Diagnosis means power-cycling the operator, checking the battery and board, and testing the track under load rather than guessing. We do that on the first visit. Call (866) 984-8340 to book a look.
A few safe checks help: confirm the operator has power, look for any visible obstruction or sand in the bottom track, and check that the safety photocells aren’t blocked or knocked askew. Don’t reach into the operator housing or attempt to move a gate that’s under motor load, since the springs and moving parts can cause serious injury. Leave the electrical and mechanical work to a trained professional. Then call (866) 984-8340 and describe what you saw.
Get your North Las Vegas gate working again. Whether it’s a solar-powered acreage slider, a sun-cooked control board, or a wide RV gate that won’t latch, we’ll give you an upfront price before any work starts and stand behind it in writing. Call (866) 984-8340 for a free estimate, and a live person will answer, any hour of the day.
Written by the team at Ironworks Gate Co.