A Ironworks company - serving Winchester, NV

Before & After Gallery - Ironworks Gate Co. Winchester

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Gate Repair Before & After in Winchester, NV

Claims are easy to write and hard to check. Gates are different: you can see a sag that closed square, a weld that stopped the rattle, a swing that finally lines up with the latch. Below are jobs we’re glad to put on the record, described in plain terms. If your gate is on the wrong side of one of these, you’ll recognize it. We’re licensed and insured, our technicians have up to 30 years of experience, and every job here is backed by our 90-Day Done Right Promise.

Call (866) 984-8340

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Recent Transformations

These write-ups cover the kinds of gate failures we see most in Winchester: desert heat working on metal and wood, wind loading on wide estate swings, and older slide gates whose motors quit quietly. Photos from real jobs will be added as they come in; each spot below is captioned by service so you know exactly what you’re looking at. Every price we quote is settled before a single bolt is turned.

Sagging double-swing driveway gate – hinge and post repair

BeforeBeforeAfterAfter
Gate Repair – hinge replacement and post re-set on a double-swing driveway gate.

The problem: two wrought-style gate leaves had dropped enough that the center latch missed by nearly two inches and one leaf dragged across the driveway on the way closed. Years of summer heat riding on undersized hinges, plus a gate post that had worked loose in the soil. What we did: pulled both leaves, replaced the hinge set, reset the ground sleeve on the failing post, and re-aligned the leaves. The result: the gate latches first try, swings without a scrape, and closes the way it did when it was hung. The homeowner called it the first quiet morning in a long time.

Rusted weld failure on a cantilever slide gate

BeforeBeforeAfterAfter
Gate Parts & Welding – weld failure ground out, braced, and re-welded on a slide gate frame.

The problem: a cantilever slide gate had a cracked weld at the junction where the frame meets the top rail, and the gate was flexing in the wind when it traveled. The crack had opened enough that the gate shimmied. What we did: braced the frame, ground the failing weld out completely rather than patching over it, and re-welded the joint, then checked the frame for follow-on stress. The result: no flex, no shimmy, and a gate that tracks smooth the full length of its run. We flagged a second joint that showed the same early wear so it wouldn’t become the next crack.

Gate opener that quit after a power surge – motor and control repair

BeforeBeforeAfterAfter
Gate Motor & Opener – diagnostics and repair on an opener that stopped after a surge.

The problem: the gate simply stopped one afternoon, after a storm, with the driveway controls dead and the manual release the only way in. A surge had taken out the control board on the opener. What we did: tested the motor first to rule it out, replaced the board, checked the safety edges and the limits, and re-set travel. The result: the gate opens and closes on command again, and the safety edges trip correctly. We’re trained and equipped on nine leading brands, so on this callout we had the part number on the first visit rather than the third.

Keypad and entry control that wouldn’t accept codes

Professional technician performing on-site metal gate repair and welding
Gate Access Control – keypad and entry control repair, with codes restored and tested.

The problem: the keypad was dropping codes on some presses and ignoring others, so family and visitors alike were walking to the box to let themselves in. The wiring inside the post had weathered. What we did: traced the wiring, replaced the failing entry control, cleaned up the connections, and re-programmed the codes with the homeowners present so they left knowing them. The result: every code works first press, and the gate responds. Small job, but it turned a daily annoyance into nothing.

Hanging a new estate gate on an existing stone post

Professional technician repairing an ornate metal gate using a power drill
Gate Installation – a new custom estate gate measured and hung to fit existing posts.

The problem: a 30-year-old gate had reached the end of its life, and the stone posts were worth keeping. What we did: measured the opening, built the new gate to fit the existing posts, and hung it with the right hinge set. The result: a gate that suits the house and the posts, closes square, and should be closing the same way in another thirty years. Installation work like this is measured and scheduled, so we came out first for the free measure, then with the gate. The written price was agreed before we started.

Storm-season tune-up: tightening a gate before the wind

Professional technician using an angle grinder for metal gate repair
Gate Repair – seasonal tune-up, adjustments, and safety check.

The problem: a gate that worked fine most of the year but had begun to catch a little on hot days and to rattle in the wind. Nothing broken, everything a bit looser than it should be. What we did: a full tune-up, tightening hinges, checking the opener’s force settings and safety edges, and adjusting travel. The result: a gate that’s quiet, tight, and ready for wind. This is the job our $89 Seasonal Tune-Up covers. If something does fail, you’ll find our $50 Off Any Repair Over $250 helpful.

Want Results Like These?

If one of these looks like your gate, call us at (866) 984-8340. A live person answers every call, day or night, and you’ll get an upfront price before any work begins. Estimates are free, the written 90-Day Done Right Promise covers every job, and our technicians are background-checked and insured. Done right, and backed in writing.

Written by the team at Ironworks Gate Co. Winchester.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Need Gate Repair help in Winchester? Licensed & insured · 60-minute response · free estimates
Call (866) 984-8340
Local Service Coverage

Request a Free Estimate in Winchester

Tell us what you need - Ironworks Gate Co. Winchester responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch