Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Repair Services in Winchester, NV
If your gate has stopped opening, is dragging on the ground, or the opener hums and does nothing, call Ironworks Gate Co. Winchester at (866) 984-8340. We handle gate repair, installation, motors, access control, and welding for homeowners across Winchester, and a live person answers the phone 24 hours a day, seven days a week. We know this town block by block, from the older iron gates along Desert Inn Road to the rental courts off Decatur Boulevard. Repairs are quoted upfront and settled before any bolt is turned.
Why Winchester Homeowners Choose Ironworks Gate Co. Winchester
Winchester homeowners tend to be people who have stayed put for decades and intend to stay longer. They call instead of clicking, and they remember the last outfit that left a gate half fixed. That suits us. Our technicians have up to 13 years of experience, they are background-checked and uniformed, and they work in your yard the way they would work in their own mother’s. We specialize only in driveway and estate gates, so nothing about your gate is a side job for us.
Every job comes with our 90-Day Done Right Promise, written and honored without argument: if the work is not right, we come back and make it right. We are trained and equipped on nine gate-automation brands, including LiftMaster and DoorKing, so the correct fix happens on the first visit. Neighbors in the Winrock and Charter Point areas call us for sagging hinges and dead openers, and they get a straight answer on the same call. Most repairs are finished in a single visit. The 400th job gets the same care as the first.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Repair Services We Offer in Winchester
We cover the full scope of driveway and estate gate work in Winchester, from a hinge that has rusted through to a keypad that no longer recognizes a code. Here is what that looks like.
Gate Repair in Winchester
Sagging gates, broken hinges, jammed latches, and gates that will not close square are the everyday work. Desert heat and winter cold work metal and footings hard, and we fix the cause rather than propping up the symptom. Learn more about our Gate Repair in Winchester.

Gate Installation in Winchester
New gates get measured, ordered, and scheduled, with a written price before anything is built. We set posts to suit county wind-load rules, not whatever is quickest. Learn more about our Gate Installation in Winchester.

Gate Motor & Opener in Winchester
We service and replace openers on LiftMaster, DoorKing, Elite, Mighty Mule, and others, matching the motor to the gate’s weight and swing. A motor sized wrong fails early, and we will not sell you one. Learn more about our Gate Motor & Opener in Winchester.

Gate Access Control in Winchester
Keypads, remotes, intercoms, and entry systems for homes and small commercial parcels get wired in and tested. We handle the power run and safety edges as part of the job. Call (866) 984-8340 for a free measure and estimate.
Gate Parts & Welding in Winchester
Hinge posts, frames, rollers, and tracks are repaired at the weld, not patched with hardware-store brackets. Old iron gets squared and re-hung so it swings true. Call us to talk through what your gate needs.
Neighborhoods We Serve in Winchester
We work throughout Winchester and the surrounding unincorporated county pockets. Response is usually the same day for repairs called in during the morning. A few of the areas we visit most:
- Winrock and the streets near the Boulevard Mall
- Charter Point and the Desert Inn Road corridor
- The residential blocks off Decatur Boulevard
- Older courts and duplexes near the Strip-adjacent edge
ZIP codes 89169 and 89102 come up often. Wherever you are in Winchester, the call goes to the same place and the price is settled the same way.
See the difference
Before
After
Before
After
Before
AfterWhy Winchester’s Climate & Housing Affect Gate Repair
Winchester sits in the Mojave, and the gate work here shows it. Summers over 100°F bake wood and vinyl until they warp, fade finishes, and make metal expand and bind, so a gate that closed easily in March catches on the latch by July. Winter overnight freezes and the occasional monsoon microburst drive water into hinges and footings, and that is where corrosion starts. Wind-driven sand works into tracks and rollers, so sliding and swing gates here need adjusting more often than in milder climates. Layer that on the local housing stock, which is mostly 1950s to 1970s single-family homes, duplexes, and small apartment courts, many with original wrought iron on short setback lots, and you get gates that were never built for automation now carrying motors. Rusted hinge posts, posts sagging from decades of sun-baked soil movement, and undersized posts are what we find most weeks. The fix usually starts at the post, not the motor.
Pricing for Gate Repair in Winchester
We quote in writing before work starts, and the bill matches the quote. Typical ranges for Winchester:
- Hinge repair or re-weld: $150 to $350
- Gate adjustment and realignment: $120 to $250
- Opener repair or board replacement: $180 to $450
- Roller, track, and latch work: $100 to $300
- Keypad or access control repair: $150 to $400
New installation and full automation are measured and priced on site, not guessed over the phone. Our standing offers apply: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and 5% off for seniors and veterans, always. Call (866) 984-8340 for an exact quote, and estimates are free.
Service Area – Cities Near Winchester
We serve Winchester and the communities that surround it. If you are just over the line in Paradise, Las Vegas, Whitney, or Sunrise Manor, the same crew and the same written guarantee apply. Call and we will confirm we cover your street.
Serving Winchester, NV – Our Local Coverage Area
We serve Winchester and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Winchester
Most Winchester gate repairs run $120 to $450 depending on whether the problem is a hinge, a weld, or an opener. You get the price in writing before we start, and it does not change on the bill. Call (866) 984-8340 for an exact quote, and estimates are free.
Often, yes. For repairs called in during the morning we usually reach Winchester the same day, and a live person answers 24 hours a day. Call (866) 984-8340 and we will tell you straight when we can be there.
Yes, and it comes from Clark County, not the City of Las Vegas. Because Winchester is unincorporated, gate permits, inspections, and right-of-way clearances follow county code, and we routinely see gates that pass a city eye but fail a county inspection for clearance or wind-load anchoring. We handle the county side of that for you.
Usually, if the posts and frame are sound. Winchester has a lot of aging manual gates, and we check the posts first because an undersized post will not carry an opener no matter which brand goes on it. If the gate needs re-welding first, we tell you that upfront. Call (866) 984-8340 for a free measure and written price.
Yes. Access control and opener installs include the power run and safety edges, wired and tested as part of the job. That work is measured and scheduled rather than same-day, and you get the price in writing first. Call (866) 984-8340 to set up your free estimate.
Written by the team at Ironworks Gate Co.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What Winchester Customers Say
"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."
- Devon Ingram"Our slide gate had been dragging for months and getting worse. The chain was stretched and a guide roller had seized. Both replaced, and he reset the limits so it stops properly at each end now."
- Veronica Ramirez"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."
- Jamal Dawson