A Ironworks company - serving Winchester, NV

Electric Gate Repair in Winchester, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Electric Gate Repair in Winchester, NV

Electric gate repair in Winchester usually costs between $195 and $650 depending on whether the fault sits in the operator, the access control, or the gate’s mechanical structure. Most of the calls we take here are automatic driveway gates that stop responding to the remote, run a few feet and reverse, or swing open on their own at odd hours. We handle the whole chain: the motor and control board, the safety sensors, the keypad or intercom, and the gate frame and hinges the operator has to move.

This work is a specialty of ours. We’re Ironworks Gate Co. Winchester, a gate-only company, and every electric gate call is a chance to make a 20-year-old gate behave like new again. Call (866) 984-8340 and a live person answers, day or night. For the full picture of what we do across hinges, welds, and motors, see our Gate Repair in Winchester page, and for the broader service family, our Gate Repair hub.

Key Takeaways

  • Most electric gate faults in Winchester are operator or control-board failures, not gate-frame damage.
  • We service nine automation brands, including LiftMaster, FAAC, Elite, and Mighty Mule.
  • Every completed electric gate repair is backed by our written 90-Day Done Right Promise.
  • Upfront pricing is settled before any work starts, and a live person answers our phone 24 hours a day.

When You Need Electric Gate Repair

An electric gate fails in a handful of recognizable ways. Here’s what we hear most often from homeowners on the east side, where heat, dust, and hard water are part of daily life.

  • The gate won’t move at all. You press the remote or punch the keypad and nothing happens. Sometimes it’s a dead battery in the remote, sometimes it’s the control board, sometimes it’s a tripped safety sensor. A quick diagnostic tells us which.
  • The gate opens partway and reverses. This usually means a safety sensor is blocked, misaligned, or covered in dust from the desert wind. On older LiftMaster operators, a failing limit switch can cause the same behavior.
  • The gate opens by itself. This is one of the more unsettling failures. It can point to a stuck relay on the control board, a keypad that’s shorted out, or an interference issue with the remote frequency. We’ve seen this plenty on older FAAC operators around Winchester after a power surge.
  • The motor hums but the gate doesn’t move. A humming operator with no movement usually means a stripped gear, a broken drive chain, or a jammed hinge putting too much strain on the motor. It’s often a sign the gate itself needs welding or hinge work alongside the electrical repair.
  • The gate moves slowly or jerks. Friction in the track, worn rollers, or a weak battery in a solar-powered Mighty Mule setup can all cause this. We check the mechanical side first, since a smooth gate puts far less wear on the operator.
  • The keypad or intercom stops working. Access control fails independently of the operator. A keypad that’s lost its programming or a gate phone that won’t ring is a separate repair from a motor issue, and we handle both.

Our Electric Gate Repair Process

We keep the process simple and predictable, so you know what’s happening at each step and what it will cost before we turn a single bolt.

  1. Phone call and quick questions. When you call (866) 984-8340, a live person picks up and asks a few questions: what the gate is doing, what brand the operator is, and how old the system is. That helps us bring the right parts on the first visit.
  2. On-site diagnostic. A background-checked, uniformed technician walks the whole system: the operator, the control board, the safety sensors, the access control, and the gate frame and hinges. We test the gate under its normal load to see how the mechanics and the motor are working together.
  3. Upfront written estimate. We lay out what’s wrong and what it will cost to fix, in plain language. You approve it before we start. No surprises on the bill.
  4. The repair itself. Most electric gate repairs are finished in a single visit. We carry parts for the operators we service most, including LiftMaster, FAAC, Elite, and Mighty Mule, so we’re not waiting around for a delivery.
  5. Full test and walkthrough. We run the gate through a complete cycle several times, test the remote, keypad, and safety sensors, and walk you through what was fixed. If anything needs adjusting, we adjust it before we leave.
  6. Written 90-Day Done Right Promise. Every job is covered in writing for 90 days. If something isn’t right, we come back and make it right. No paperwork, no arguing.

Electric Gate Repair Pricing in Winchester

Electric gate repair in Winchester typically runs $195 to $650, with most single-visit repairs landing closer to the middle of that range. Here’s a rough breakdown of what common repairs cost, so you have a real number before you call.

Repair Typical Range
Diagnostic and service call $75 – $125 (often credited toward the repair)
Remote or keypad reprogramming $95 – $165
Safety sensor replacement or realignment $120 – $220
Control board replacement $225 – $450
Motor or operator replacement $650 – $1,850 (depending on brand and gate type)
Hinge, roller, or weld repair alongside electrical work $95 – $275
Battery replacement (solar or backup) $85 – $175

A few things move the final number. The brand and age of the operator matter, since older units can be harder to source parts for. The size and weight of the gate matter too, because a heavy steel estate gate puts more demand on the motor. And the access control setup (a simple keypad versus a full intercom system) adds cost when it’s part of the repair.

Pricing is settled upfront, before any work begins. We also have standing offers that help with the final bill: $50 Off Any Repair Over $250, a Free Second Opinion on Any Written Estimate, an $89 Seasonal Tune-Up, and a permanent 5% Senior and Veteran discount. Ask about any of these when you call.

FAQs – Electric Gate Repair

How much does electric gate repair cost in Winchester?

Most electric gate repairs in Winchester cost $195 to $650, with diagnostics around $75 to $125 and motor or operator replacement running $650 to $1,850. The exact number depends on the brand, the age of the system, and whether the gate frame needs work alongside the electrical repair. Call (866) 984-8340 for an exact quote – estimates are free.

Can you repair my electric gate the same day?

Yes, in most cases. We carry parts for the operator brands we service most, and most single-visit repairs are finished the same day you call. Call (866) 984-8340 and a live person answers, 24 hours a day, to schedule a same-day visit when possible.

What electric gate brands do you repair?

We’re trained and equipped on nine gate-automation brands, including LiftMaster, FAAC, Elite, and Mighty Mule. That means the correct diagnostic and the right fix, whatever is on your driveway. Call (866) 984-8340 to confirm your brand and get a free estimate.

Is it cheaper to repair or replace an electric gate operator?

Repair is usually cheaper when the operator is under 10 to 12 years old and the failure is a single component like a control board or a safety sensor. Replacement makes more sense when the motor is failing, the parts are no longer available, or the gate itself has gotten heavier with age. Call (866) 984-8340 for a free second opinion on any written estimate, so you know which path makes sense.

Our technicians have up to 13 years of experience on driveway and estate gate systems, and every job is backed by our written 90-Day Done Right Promise. Learn more about our home page and the full range of services.

Contact Ironworks Gate Co. Winchester

If your electric gate is stuck open, won’t respond, or is acting up in ways that worry you, call (866) 984-8340 for a free estimate. A live person answers every call, day or night, and we’ll get a technician out to take a look. Upfront pricing, a square deal, and a written guarantee that says what it means.

Written by the team at Ironworks Gate Co. Winchester, serving Winchester.

Need Gate Repair help in Winchester? Licensed & insured · 60-minute response · free estimates
Call (866) 984-8340
Local Service Coverage

Request a Free Estimate in Winchester

Tell us what you need - Ironworks Gate Co. Winchester responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch