A Ironworks company - serving Winchester, NV

Ghost Controls Keypad & Intercom Repair in Winchester, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Ghost Controls Keypad & Intercom Repair: The Winchester Owner’s Guide

Keypad and intercom repair for Ghost Controls gate openers usually runs $185 to $340 installed in Winchester, and most repairs are completed in a single visit. The wireless keypad itself is often the affordable part; the intercom side and any wiring to the house push the price up. Call us at (866) 984-8340 for a free estimate and we’ll price your exact model before anything is ordered.

Call (866) 984-8340

Owners in Winchester tend to notice this one slowly. The keypad takes two or three presses to open the gate, or the intercom goes from clear to crackly to dead over a summer. Then one morning the gate won’t open from the driveway at all and the only way in is the car remote. That’s the point most people call. We service Ghost Controls alongside LiftMaster, Mighty Mule, DoorKing and six other brands, so we know this equipment.

Which Ghost Controls Models This Applies To

Ghost Controls builds its keypads and intercoms as add-on accessories that work across the AX, AR, and TSS series openers, so the part is less model-specific than the opener itself. The real question is which generation of keypad you have. Older units use a screw-terminal wiring block; newer ones use a plug-in connector with a different post spacing. If you order the wrong one, the plug won’t seat and the keypad won’t power up.

Before we quote anything, we look at three things: the label inside the opener control box, the model number on the back of the keypad or intercom faceplate, and the actual wire gauge running from the gate post to wherever the keypad is mounted. Ghost Controls wiring typically runs low-voltage and the spec matters. If a previous owner ran the wrong gauge or spliced it mid-run, the keypad can test fine on the bench and still fail in the yard.

On OEM versus aftermarket: for a Ghost Controls keypad, we generally recommend the factory-matching part because the connector and programming sequence match what’s documented for your unit. Aftermarket keypads work, but they require re-pairing the remotes and often don’t hold up through Nevada’s summer heat. We don’t stock parts or carry them on a truck. We source them per job, which is why the quote reflects the exact part you need, and we’ll tell you plainly if the aftermarket equivalent is a square deal for your situation. Ironworks Gate Co. Winchester is an independent service provider and not affiliated with Ghost Controls.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Signs Your Ghost Controls Keypad & Intercom Repair Is Failing

  • You have to press a code two or three times. The membrane switch behind the buttons wears out. On a gate post in full afternoon sun, that membrane can go soft in five or six years in this climate.
  • The keypad lights flicker or go dark entirely. Usually a failing wire connection at the gate post, not the keypad. The screw terminal loosens from gate vibration, or the low-voltage run has corroded at the splice.
  • The intercom sounds crackly or cuts in and out. Moisture working into the handset or speaker grille. Winchester’s spring dust and summer monsoon humidity both find their way into that housing.
  • The gate opens on the remote but not the keypad. The opener is fine. The problem is the keypad, the wire run to it, or the programming has reset. If it resets after every power blip, the backup battery in the keypad may be spent.
  • The intercom buzzer rings but no voice comes through. Partial failure in the intercom module. Often one channel or one direction dies before the whole unit does.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Item Typical installed range
Keypad replacement, standard model $185 – $240
Intercom module replacement $240 – $340
Wire run repair or re-termination $120 – $220
Keypad and intercom together $320 – $460

What drives the range: the specific keypad or intercom model, whether the existing wire is reusable, and whether the gate post needs any mounting work. Parts and labor are quoted separately and clearly. We settle the price with you before a bolt is turned, so the bill matches the quote. Every job comes with our written 90-Day Done Right Promise: if something isn’t right, we come back and fix it.

DIY or Call Us?

Safe to check yourself: whether the keypad has power (many have a small LED), whether the code works from a second keypad if you have one, and whether the wire at the gate post is visibly loose or corroded. Those are worth a look.

Where it goes wrong: cracking open the opener control box to test low-voltage terminals while the gate is live, or running new wire from the house to the gate. That control box holds a low-voltage system, but the opener is powered by line voltage, and a gate that moves without warning is a real hazard. Testing the wrong terminal while a motor can start is not worth saving a service call. For anything past the faceplate, call us at (866) 984-8340. We’ll tell you honestly if it’s a simple re-termination or a full replacement.

FAQs

Need Gate Repair help nationwide? Licensed & insured · 60-minute response · free estimates
Call (866) 984-8340
Local Service Coverage

Request a Free Estimate in Winchester

Tell us what you need - Ironworks Gate Co. Winchester responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch